vindicareassassin
Full Member
Member since: May 2015
Posts: 569 
|
Post by vindicareassassin on Jan 2, 2016 18:48:06 GMT -5
So, another year, another farcebook group build..... This time its entitled "Epic Build" Build, with a time span of 6 months. I've dragged this out the stash as its the epicly largestest box in my "stash under the bench", preventing my office chair going under the bench properly.  Made a small start this evening and have got the engine block and chassis together, further research now required before anymore progress. ATB Sean |
|
pt109
Full Member
Member since: April 2013
Stop staring at me! heheheh
Posts: 491
|
Post by pt109 on Jan 2, 2016 19:26:46 GMT -5
Nice subject, I love Famos.....I have the Tamiya 1/35th in the stash somewhere.
Looking forward to your build.
Paul
|
|
|
|
Post by Leon on Jan 2, 2016 19:44:12 GMT -5
I'll be following along Sean! Pulling up a chair now.  |
|
|
|
Post by deafpanzer on Jan 3, 2016 14:21:03 GMT -5
SWEET!!! Reporting to duty... good luck!
|
|
adt70hk
Forum Moderator 
Member since: November 2015
Currently attempting to build something decent!!! ;)
Posts: 2,482
MSC Staff
|
Post by adt70hk on Jan 3, 2016 17:18:15 GMT -5
Count me in!
|
|
|
|
Post by wing_nut on Jan 3, 2016 18:03:51 GMT -5
This will be perfect... you built it... and I'll watch ya do it.
|
|
|
|
Post by wbill76 on Jan 4, 2016 16:00:07 GMT -5
Even in 1/72 this one's going to be pretty good size. Looking forward to seeing you work the usual braille magic.  |
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 4, 2016 17:29:12 GMT -5
Even in 1/72 this one's going to be pretty good size. Looking forward to seeing you work the usual braille magic. I shall try my hardest! And you are right about the size, the Famo is over 4" long and the barrel alone on the kanone is 4.5" not including the breach block!! Not to worry though, it wont be alone for long, I have another Famo and a tank transport trailer, and in light of my Xmas pressy from the out-laws I'll be ordering an Albion CX22 with 7.2" howitzer on Long-Tom carriage from Milicast in the near future, really wanted a Scammell Pioneer tractor but they no longer do it with the Long-Tom sadly. Not to mention the 2 Airfix Scammell tank transporters also sat in the stash..... I've got a thing that makes me feel all funny in my tummy when I see massive military tractor units and/or large cannon/trailers (!?) just never gotten around to building any yet for some reason. |
|
|
|
Post by Deano on Jan 4, 2016 18:32:17 GMT -5
Out with the big guns Sean , this is gonna be good ..... sitting back and chilling !
|
|
desertrat
Full Member
Member since: October 2013
Posts: 934
|
Post by desertrat on Jan 5, 2016 16:45:49 GMT -5
count me in too, got one of these so will be keeping a beady eye on this .....
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 6, 2016 15:45:14 GMT -5
Through the bits built so far under a camera as I was taking pictures of other things at the time..... So far the Famo looks like this.....  The drive sprockets and some of the wheels are also done as well..... Meanwhile, the research continues.... ATB Sean |
|
desertrat
Full Member
Member since: October 2013
Posts: 934
|
Post by desertrat on Jan 6, 2016 16:45:35 GMT -5
how do you get that penny to stand up?...
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 6, 2016 17:37:04 GMT -5
how do you get that penny to stand up?... It takes hours of dedication, patience, swearing, frustration, some more swearing, a very steady hand and a small blob of Blue Tack in a wedge stuck to the back |
|
|
|
Post by Leon on Jan 6, 2016 18:33:10 GMT -5
Off to a good start Sean!
|
|
desertrat
Full Member
Member since: October 2013
Posts: 934
|
Post by desertrat on Jan 7, 2016 12:03:15 GMT -5
aarr, good old blu tac strikes again!!!
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 24, 2016 17:28:12 GMT -5
So, the motor block and gearbox came with the kit, but that's about it, so I'm scratch building all the rest, as you can see the manifolds are half done, so are the cylinder heads and water pump, next to do are the dual carbs, rocker covers and fan.... then I've got to plumb it all up with air, hydraulics and water, then I can start on the bulk head and all that's missing on that...... And all this cuz I want to leave the engine cover side doors off   ATB Sean |
|
|
|
Post by Leon on Jan 24, 2016 17:32:00 GMT -5
Nice bit of scratch work there Sean! All be worth it in the end. |
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 24, 2016 18:08:33 GMT -5
I hope so mate, I'm not actually sure what your going to be able to see once the bulk head and top engine cover are on.... Still, I know its in there, and thats what counts, right?
|
|
|
|
Post by TRM on Jan 24, 2016 20:08:43 GMT -5
Certainly does count! Nice work on the scratched engine! Keep at it!! |
|
|
|
Post by dierk on Jan 25, 2016 6:13:30 GMT -5
Nice work on the engine Sean. Also really like the weathering on the penny, the realism is astounding!
|
|
adt70hk
Forum Moderator
Member since: November 2015
Currently attempting to build something decent!!! ;)
Posts: 2,482
MSC Staff
|
Post by adt70hk on Jan 25, 2016 7:19:35 GMT -5
Nice work on the engine Sean. Also really like the weathering on the penny, the realism is astounding! There's always someone who just has to take it one step too far!!!!  SeanI've got to say that looks amazing already!! Keep it up!! Andrew |
|
|
|
Post by deafpanzer on Jan 25, 2016 13:48:28 GMT -5
Nice scratch buildin' on the engine!
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 25, 2016 18:07:14 GMT -5
Also really like the weathering on the penny, the realism is astounding! Thanks mate, it takes many hours from a practised and steady hand to achieve that level of detail.... What can I say...... I'm a slave to my hobby Bit more done tonight..... Carbs and air manifold, fan, pulleys and belts, plus some round box of tricks that sits behind the carbs, still looking for the correct size stock to make the rocker covers from at this time.... I'm happy with the progress so far but may have to put this down for a week or so to finish the Sdkfz 7 I already have started   ATB Sean |
|
|
|
Post by dierk on Jan 26, 2016 4:04:20 GMT -5
Nice pregress!
|
|
adt70hk
Forum Moderator
Member since: November 2015
Currently attempting to build something decent!!! ;)
Posts: 2,482
MSC Staff
|
Post by adt70hk on Jan 26, 2016 8:17:23 GMT -5
It looks even more amazing with the engine radiator grill off!! Keep it up Sean!
|
|
|
|
Post by wbill76 on Jan 26, 2016 11:24:56 GMT -5
Engine work is paying off! As for the penny, be careful about making the other coins jealous. It's all about face value remember... |
|
desertrat
Full Member
Member since: October 2013
Posts: 934
|
Post by desertrat on Jan 27, 2016 15:53:22 GMT -5
So, the motor block and gearbox came with the kit, but that's about it, so I'm scratch building all the rest, as you can see the manifolds are half done, so are the cylinder heads and water pump, next to do are the dual carbs, rocker covers and fan.... then I've got to plumb it all up with air, hydraulics and water, then I can start on the bulk head and all that's missing on that...... And all this cuz I want to leave the engine cover side doors off ATB Sean that,ll teach yer!!!! but don,t stop! looking fantastic so far, |
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Jan 28, 2016 18:23:44 GMT -5
Fitted the rocker covers tonight, believe it or not they are actually made from sections of an old Tamiya M48A3 main gun barrel.....  An idea of what will be seen when the top cover goes on, there is still fire wall brackets, plumbing, the steering column and air box yet to add and get in the way though....   Its now on stop for a week or so as I've other projects that need my attentions ATB Sean |
|
|
|
Post by dierk on Jan 29, 2016 5:58:09 GMT -5
Engine looks the canine's danglies Sean!
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569
|
Post by vindicareassassin on Feb 6, 2016 19:17:51 GMT -5
Bit more done, etched some tread into the otherwise flat tyres of the K18, not fully happy with the spacings on a couple but after I add some weathering It'll be less obvious..... made the barrel, finished assembling the crew cab, made the bulkhead support brackets, made the steering box and lower half of the steering column...   Also started plumbing up the bulkhead.....  ATB Sean |
|
