|
|
Post by dupes on Jan 4, 2013 9:35:04 GMT -5
OK. First one coming out of the pile of unloved/unfinished builds I've amassed. Trumpeter kit, only aftermarket is the Eduard PE seat belts. Reason it stalled - the photoetched seat belts. For some reason, I could NOT make myself bang them out. No idea why. Also, having a real issue locating a proper color for the early-war Navy "orange yellow".  So yesterday, I hauled this beast out of the box and told myself "self - do the damn belts!". So I did. They had a ton of parts, and were very fiddly, and I ended up spending a lot of time on the floor with my flashlight, but they're done.  Next up is to untape the fuselage and insert the pit. Wings are already attached, as there was no way to get a good tight fit without pulling from inside the fuse. Small handful of other parts to go, otherwise she's ready for the paint booth. Yellow and natural metal scheme...cake, right?  |
|
Thom
Full Member
Member since: November 2011
Models Impossible (There is more to come.)
Posts: 439
Nov 16, 2011 12:47:25 GMT -5
Nov 16, 2011 12:47:25 GMT -5
|
Post by Thom on Jan 4, 2013 9:54:15 GMT -5
Dupes try Model Masters Acryl 4683 Chrome Yellow mixed with a bit of Red or if you can get it Gunze Sangyo H24 Orange Yellow.
Cheers,
Thom
|
|
|
|
Post by deafpanzer on Jan 4, 2013 9:56:10 GMT -5
Nice work with the office!!! I ALMOST brought a wingy kit yesterday at LHS as they were having big sale...
|
|
|
|
Post by bullardino on Jan 4, 2013 10:06:02 GMT -5
According to Urban's chart at IPMS Stockholm you should go with Gunze's H329, which is gloss so you'll have to overspray it with some flat varnish.
|
|
|
|
Post by dupes on Jan 4, 2013 10:09:40 GMT -5
I should have made some caveats - acrylic only (prefereably Tamiya), and my lines of locally-accessible paints are very limited. I can get Tamiya, Model Master, aaaaand I think an entire run of Polly Scale (Floquil? Whatever it's called now).
|
|
|
|
Post by dupes on Jan 4, 2013 10:10:59 GMT -5
Thom - I'm colorblind. What's a "bit of red"? 10%? 20% This is why I'm having issues with this color...can't find a solid Tamiya formula like I'm usually able to.
|
|
|
|
Post by bullardino on Jan 4, 2013 10:13:08 GMT -5
MM 1790 should be close, according to the same table I said before...
Edit: Model Master seems to have changed their color numbers, now it seems it is MM 1707 Chrome Yellow.
|
|
|
|
Post by dupes on Jan 4, 2013 10:16:35 GMT -5
1790? I'll check it out today!
|
|
|
|
Post by bullardino on Jan 4, 2013 10:17:56 GMT -5
1790? I'll check it out today! I edited... Looks like MM changed their range numbers, now Chrome Yellow should be 1707. |
|
|
|
Post by dupes on Jan 4, 2013 10:18:44 GMT -5
1707? I'll check it out today! (heheheh)
|
|
modelfreak72
Full Member
Member since: January 2012
Why worry, each of us is wearing an unlicensed nuclear accelerator on his back.
Posts: 1,479
Jan 28, 2012 23:21:46 GMT -5
Jan 28, 2012 23:21:46 GMT -5
|
Post by modelfreak72 on Jan 4, 2013 11:00:23 GMT -5
Ok never mind me asking what color you are going to do from the other post. The boys got you on the right track with the chrome yellow, gonna be a pretty bird in those colors!
|
|
Thom
Full Member
Member since: November 2011
Models Impossible (There is more to come.)
Posts: 439
Nov 16, 2011 12:47:25 GMT -5
Nov 16, 2011 12:47:25 GMT -5
|
Post by Thom on Jan 4, 2013 11:22:15 GMT -5
Dupes I would go with 5% to 10% red, starting with 5% first of course. And sorry I should have mentioned I use Insignia Red MM Acryl 4714 and the 1707 is for MM Enamel so you still want to look for the MM 4683 for the Acryl.
Cheers,
Thom
|
|
|
|
Post by fightnjoe on Jan 4, 2013 22:24:02 GMT -5
fantastic. looks dang clean and crisp from here.
joe
|
|
Deleted
Member since: January 1970
Posts: 0
Apr 18, 2024 10:24:20 GMT -5
Apr 18, 2024 10:24:20 GMT -5
|
Post by Deleted on Jan 5, 2013 3:57:29 GMT -5
Dupes,I'll sign up to watch this little beauty to the finish line!!Nice work on the pit,and belts!!!Were they the coloured etch ones?
|
|
|
|
Post by bullardino on Jan 5, 2013 4:46:26 GMT -5
Dupes I would go with 5% to 10% red, starting with 5% first of course. And sorry I should have mentioned I use Insignia Red MM Acryl 4714 and the 1707 is for MM Enamel so you still want to look for the MM 4683 for the Acryl. Cheers, Thom Thanks a lot for the correction  I don't know MM color range, I just trusted IPMS Stockholm |
|
|
|
Post by bbd468 on Jan 5, 2013 12:24:00 GMT -5
Hey Dupes, Man im glad you dusted off the F4F! Shes already lookin' fantastic. Great job on...the office  thats what the wingy fellas call it right? ;D  Keep it comin' man shes a peach! Gary |
|
ogrejohn
Full Member
Member since: June 2012
Go away or I shall taunt you a second time!
Posts: 1,259
Jun 1, 2012 17:33:59 GMT -5
Jun 1, 2012 17:33:59 GMT -5
|
Post by ogrejohn on Jan 5, 2013 17:36:12 GMT -5
Good to get the queens out of the way Dupes and this one is looking mighty fine!
|
|
|
|
Post by dupes on Jan 7, 2013 11:56:46 GMT -5
Hey thanks guys! Chris - those are indeed the pre-painted etch belts. That set comes with both an early and late version, so I have leftovers for the blue/gray variant still sitting in the stashola. Gary - yep, "office" is correct! Hahahhaha. Still working on my basement studio, which is taking a good chunk of my time, but I hoooope to get more time on this guy (and the rest of the queens) very shortly. |
|
|
|
Post by dupes on Jan 8, 2013 12:46:20 GMT -5
Got some time to work on the Wildcat last night. Had hoped to get the fuselage sealed up and fire a bit of primer at her - didn't pan out. Took me at least 2 hours to get the two halves buttoned up...the pit and firewall just did NOT want to fit in there. Finally got it all squeezed together and glued, but it made the fit a bit rough (I'm guessing the cross section is a bit out of round at this point!). Got a bunch more puttying and sanding in my future. Of course, the worst seam is right on top between the nose and pit. Blah.  |
|
Deleted
Member since: January 1970
Posts: 0
Apr 18, 2024 10:24:20 GMT -5
Apr 18, 2024 10:24:20 GMT -5
|
Post by Deleted on Jan 8, 2013 15:07:13 GMT -5
I always seem to have problems with the fit forward of the 'Pit.Was there much in it,fit wise?
|
|
thug626
Senior Member
Member since: January 2013
Posts: 1,771
Jan 15, 2013 13:05:28 GMT -5
Jan 15, 2013 13:05:28 GMT -5
|
Post by thug626 on Jan 20, 2013 13:47:59 GMT -5
Greetings Dupes, It's good to see a kit resurrected, especially when you've done a great job on it. If I remember correctly Bob (aka M1Carbine) had some fiddly fuselage fit issues with his Trumpy Avenger. Perhaps a Trumpy idiosyncrasy?  What you've gotten done looks quite good. Remind the kit who has the opposable thumbs and the bigger brain pan. ;D Dave |
|
|
|
Post by robbo on Jan 20, 2013 17:57:35 GMT -5
Nice one to start off with Dupes |
|
|
|
Post by Mence on Jan 21, 2013 13:37:39 GMT -5
Pleased to see this resurface.
|
|
|
|
Post by dupes on Sept 4, 2015 20:21:04 GMT -5
It's thread resurrection day! I can't believe that this thing has been sitting on the shelf of doooom for (an additional!) two and a half years. Dang. Decided to haul it out last night, and good or bad (re: fuselage seams) it's going to get finished! I think that seam filling is my most-lacking modeling skill (it used to be decals, but I got that worked out pretty well). I don't know if it's tied in with the colorblind thing or what, but I can never tell if they're completely smooth. Putty and filler like crazy, sand like crazy, and it's a crapshoot as to whether or not it's actually right. Any good tips in that department? Anyways, here's what's headed down to the paint shop after copious amounts of Tamiya tape, blue painters tape, and a chopped up Micromark catalog:  |
|
|
|
Post by JimD on Sept 4, 2015 21:36:58 GMT -5
This one has lingered too long. Git-r-done.
|
|
|
|
Post by Leon on Sept 5, 2015 6:44:00 GMT -5
The old bird is looking good Dupes! |
|
|
|
Post by dupes on Sept 5, 2015 9:26:21 GMT -5
Buncha coats of paint drying this morning...hope to get a progress pic up later!
|
|
|
|
Post by wbill76 on Sept 5, 2015 14:13:39 GMT -5
You could always resort to the braille test...when in doubt, I use my fingertip and/or a fingernail edge to test if I really did get as smooth as the Mk 1 eyeball says it is. |
|
|
|
Post by dupes on Sept 5, 2015 19:38:31 GMT -5
Well...I need to figure out something, because they seams on this one are "imperfect" at best, it turns out!
Pushing on regardless. I want this thing off the shelf of doooooooom.
|
|
|
|
Post by wing_nut on Sept 5, 2015 19:53:03 GMT -5
Imagine that. I missed a build. Wanna see what you do with that.
|
|
thats what the wingy fellas call it right? ;D 
Keep it comin' man shes a peach!
