Tamiya Leopard 2A6 - Finished (pictures)

[paulh]

As my venerable, if somewhat inaccurateT-62A by Tamiya nears finishing I've decided to pull this one out of the stash;



This going to be a straightforward out of box build- and more of a WiP than Blog- as I invariably forgt to take pictures at key stage

No AM or other add-ons (planned for the moment at least) with a more accurate rendition of NATO 3-tone than the 1A4 and by way of a change I'm considering a factory fresh finish(again -for the moment ).

Planning to get some pics up later on today.

TTFN
P ;D

[406 Silverado]

Look forward to this Paul. What scale is it ?

[TRM]

Count me in Paul!!!

[martyncrowther]

Interesting choice Paul this should be most interesting!

[paulh]

Nice to have you guys along.

Rob -she's 1/35 and after a couple of hours this morinig I've realised its about as small as my eyes can cope with- I'veseroiusly struggled getting things into focus with towv hooks and the like- a bit worrying tbh.
I going to have to organise a visit to the optometrist later this week I think
P

[robbo]

Nice choice Paul, I love a factory finish too mate

[wbill76]

Sounds like a fun project Paul! Sometimes the OOB projects can be the most rewarding, look forward to seeing what you do with this one.

[jackh]

I'm in Paul.

[paulh]

Cheers guys- great to have you all along!

P

[armorguy]

A nice clean finish why not ? Something different for a change !

[paulh]

For those expecting the ubiquitous sprue shot….. sorry to disappoint too keen and got stuck straight in

What you get in the box;
4 Sprues of –as always- wonderfully engineered and crisply moulded green styrene, including 2 fully duplicated sprues carrying running gear and other bits an pieces many of which are destined for the spares box. Additionally, you get both the L44 and L55 Rheinmetal 120mm so you’ve got options already!

There are also 2 useful alignment jigs provided for the suspension arms to help ensure things dry true- similar to the one found in the Italeri Ia4 kit. A very useful inclusion that looks like it may be helpful for other non-Leo builds, though I’m not sure why it’s needed given Tamiya’s reputation for engineering & fit(?)

Acetate for sights and periscopes

Clear sprue with light lenses and crew goggles

¾ length commander & loader as well as the fully length commander form the original A5 molding

String for tow hawsers- that is probably going to be replaced with some brass picture wire

Horrible vinyl mesh that is meant for the turret baskets- I can never get on with this stuff so that’s probably up for a change as well -so much for out of box!

Tamiya’s own vinyl band tracks- as with everything else – a good rendition of the real deal from what I can gauge.

Build;
After somewhat less than 2 hours:
Running gear is in place, courtesy of the ubiquitous polycaps, and the rear hull plate is also completed. Attachment of this was a dream. The fit was so good that it virtually clipped into place and was held there by the tension of the plastic itself whilst I applied some Tamiya extra-thin.

I’ve decided to leave off most add ons i.e. tools, lights etc until much later given my thumbs and current eye-sight! So there you have it- Tub sub-assembly complete(for now)





Hull top- couldn’t help myself with this tried a quick dry fix on the tub- oh boy I almost wet myself with delight- virtually clicked into place.!!! Why do other manufacturers over-engineer kits??

I know its each to their own and I will on occasion dig into something a bit more complicated myself but this has been a joyous reminder of why I do this –it’s to relax!

Mini-rant over- back on track ;D

Bases for lights, tow hooks, Glacis gausers, spare track and Fan covers… oooohhhhh



This should give you an idea of the quality of what’s on offer here;
The Fan covers consist of a frame with a number of radial arms over which a fine mesh sits.
Tamiya have managed this brilliantly in my humble opinion without reverting to either oversimplifying or resorting to PE.

Picture below is a comparrison of the comparrable item from the ESCI



Clever design and moulding really gives the sense of the radial arms being below a mesh- I’m not sure that the pic does it justice tbh – but its there.
So thats where I'm up to.

ACW

P

[rm6239]

Paul, always had a soft spot for the Leopards so will be sitting in for this build mate.

cheers
Rossco

[paulh]

Hi rossco, nice to have you along .

Hopefuly an update of some sort later tonight.

[paulh]

Calm down..... Calm down.....Calm down....

Now onwards to the whole point of a tank: the big shooting thing in the big turn around thinggy .
Unfortunately not much tonight - only time for some glue on the shooty thing and a dry fit of some of the turret panels.

The L55 barrel goes together very cleanly- a very nice result for a two-piece moulding -what these guys would do with slide moulding....










The gaps between the "cheek-armour" and turret propper are meant to be there so mental note to self: no filler ;D

Probably nothing new until the weekend now - so jackwagon...will you be ok...? ;D

Laters peeps.

P

[spud]

that is one big ass Turret

[paulh]

Spud- you aint wrong my friend- and there's still stuff to add to it

jackwagon- its virtually the same kit The A6 kit contains an extra sprue with the L-55 barrel and some additional bits.

TTFN
P

[jackh]

Nice progress Paul, sounds like a "drop some glue in the box shake it and voila you have a Leo 2" ((LOL)). Looking good mate.

[paulh]

LOL - one of these days jack I might try that with a Tamiya kit-

But seriously it is a true beaut- highly recommended!
P

[danb]

Nice work so far mate like what Spud said that turret is mahooooosive i do like a Leopard more please!!!!

Dan B

[wbill76]

Nice clean work so far Paul, looks like this one is coming together almost painlessly...the best kind of build!

[paulh]

Cheers guys
Hopefully some bench time tomorrow/Saturday and some updates

P

[martyncrowther]

Very nice work Paul

[nemesis]

Excellent choice of kit Paul. The Tamiya Leo may be an "old" kit, but the attention to detail and accuracy still make it the best Leo kit on the market. I have built several Leo's and they are a breeze to build, no headaches, no cock-ups in the instructions, just pure modelling fun!

Regards from the Swamp

Eth

[paulh]

Nice to see you on board here Eth, would agree with the fun statement- I really enjoy putting together any Tamiya kit tbh- hell I could even imagine myself building something from pre-1950 out a Tamiya box

I'm not sure this'll be up to the standard of the last of your Leo's I saw (2A6M IIRC) but hopefully it'll turn out half-decent.

TTFN
P

[nemesis]

Paul, to get a Leopard up to the standard of mine you would need help from a cat called Elric who seems to think he can build models....as Nemo pointed out ;D

Regards from the Swamp

Eth

[WigWag Workshop]

Looking Great! Will be watching for updates

-Steven

[paulh]

I better get my finger out on this one I think!
P

[paulh]

No pressure there then....

[nemesis]

Jun 25, 2012 11:16:12 GMT -5 @dickyf said:

Yes, you better had Paul - we're gonna introduce an MSC Sin Bin for people that live in Wales that start Leopard 2 builds and fail to update at least once every two days.............. guess who the first resident's gonna be? lol

Hands off the mighty Welsh Nation you silly,knees bent, running around English type person you

Regards from the Swamp

Eth

[paulh]

An update of sorts: build almost complete



Paint time fast approaching
P