|
|
Post by wouter on Apr 2, 2016 6:15:39 GMT -5
Nice to see the decs in place, Leon. Now the real fun can start ey  What's the finish you are aiming for...please say very dirty Cheers |
|
|
|
Post by Leon on Apr 2, 2016 6:24:03 GMT -5
Wouts,she's going to be a dirty Kitty! |
|
|
|
Post by wouter on Apr 2, 2016 6:31:08 GMT -5
You got all of my attention now Cheers |
|
|
|
Post by Leon on Apr 2, 2016 10:42:08 GMT -5
Is it too groan-worthy a pun to say it's a marked improvement?  "LOL" No it's not Dierk!  Markings make a big difference. |
|
|
|
Post by Leon on Apr 4, 2016 17:19:02 GMT -5
Evening guys! got the pin wash on and used some dark steel pigments on the tools.Also added a little rust to the exhaust and spare tracks.Now I just need to figure out a filter to tone down the camo again as the clear coat wiped out what I had done prior to it.  001 by Leon Dorak, on Flickr  002 by Leon Dorak, on Flickr  003 by Leon Dorak, on Flickr  004 by Leon Dorak, on Flickr  005 by Leon Dorak, on Flickr  006 by Leon Dorak, on Flickr Thanks for looking,as always ACW. |
|
afvfan
Senior Member
Member since: December 2012
Bob
Posts: 1,772
Dec 10, 2012 17:32:38 GMT -5
Dec 10, 2012 17:32:38 GMT -5
|
Post by afvfan on Apr 4, 2016 17:43:32 GMT -5
Looking good with the wash there, Leon. Just a little FYI, though. The 2 smaller pipes on either side of the left exhaust are actually air intakes and wouldn't be rusted. You can see this in the following image.  |
|
|
|
Post by Leon on Apr 4, 2016 17:59:02 GMT -5
Glad you like it so far Bob! Thanks for the info and pic,that is something I over looked when looking at ref pics.  I'll re paint the air intakes. |
|
|
|
Post by wbill76 on Apr 4, 2016 19:09:12 GMT -5
Coming along nicely Leon! Pin wash always makes those details pop! |
|
|
|
Post by Leon on Apr 4, 2016 19:44:46 GMT -5
Thank you Bill! I was worried a bit that it wouldn't show with the camo. |
|
|
|
Post by dierk on Apr 5, 2016 3:07:40 GMT -5
Coming along nicely Leon!
|
|
|
|
Post by Leon on Apr 5, 2016 4:22:52 GMT -5
Dierk,thank you!  |
|
|
|
Post by wouter on Apr 5, 2016 4:54:40 GMT -5
Always good to see the pinwash appear, makes all the details pop. Nice!
Cheers
|
|
|
|
Post by Leon on Apr 5, 2016 5:51:27 GMT -5
Thank you Wouts! Getting close to the fun part.
|
|
vindicareassassin
Full Member
Member since: May 2015
Posts: 569 
|
Post by vindicareassassin on Apr 5, 2016 7:40:04 GMT -5
Looking good mate, now's the time to get the 95/5 mix of thinner/buff out and give it a couple of over all passes, it will tone down and tie it all together, I also give mine a third, and sometimes forth, on the lower half as dust build up is greater there.
|
|
|
|
Post by Leon on Apr 5, 2016 9:13:06 GMT -5
Sean thank you!
I like your idea using the buff.I still need to do some chipping and seal the decals.
|
|
|
|
Post by armorguy on Apr 5, 2016 11:26:16 GMT -5
Well done so far Leon, it's getting better and better !
|
|
|
|
Post by Leon on Apr 5, 2016 12:53:52 GMT -5
Thank you Guy! Hope to get more done this weekend.
|
|
DeafStuG
Full Member
Member since: May 2013
..
Posts: 1,283
|
Post by DeafStuG on Apr 5, 2016 20:01:33 GMT -5
Looking good! I have some panther kits in my stash, I haven`t build with 1/35 panther yet but maybe later. |
|
|
|
Post by Leon on Apr 6, 2016 4:25:27 GMT -5
Thank you Jeremy! I'll be keeping an eye out when you decide to build one. |
|
|
|
Post by Leon on Apr 11, 2016 16:21:04 GMT -5
Hi guys, finally got a nice day and rushed home from work and got the flat coat on the kitty! I'll post the pics after this has time to cure for a bit. |
|
|
|
Post by Leon on Apr 11, 2016 19:32:02 GMT -5
|
|
|
|
Post by Tojo72 on Apr 11, 2016 20:22:58 GMT -5
Looking real nice.
|
|
|
|
Post by deafpanzer on Apr 11, 2016 22:54:16 GMT -5
Spot on!
|
|
|
|
Post by Leon on Apr 12, 2016 4:45:49 GMT -5
Anthony, Andy thank you guys! |
|
|
|
Post by dierk on Apr 12, 2016 5:12:54 GMT -5
Looking good, in a dull sort of way |
|
|
|
Post by Leon on Apr 12, 2016 6:26:18 GMT -5
Thank you Dierk!
|
|
charleygnarlyp290
Full Member
Member since: October 2014
Posts: 136
|
Post by charleygnarlyp290 on Apr 15, 2016 20:53:53 GMT -5
Looks great. Gets me kind of stoked to start my Panther kit going.
|
|
|
|
Post by Leon on Apr 15, 2016 20:59:11 GMT -5
Thank you Charley! Get it out and join the Panther fest. Can never have enough Panthers being built. |
|
tnt10512
New Member
Member since: June 2016
I am looking for Dragon's Tiger I instructions for kit 6253. I had a playful puppy problem!
Posts: 15
|
Post by tnt10512 on Jun 18, 2016 8:32:42 GMT -5
Nice Paint job, you had said, "I also posted my build in the Axis armor! You may have to search back a page or two to find it as I haven't had any progress on it in awhile. " What else do yo plan to do with it? The one I am doing, I just keep looking at it and adding things. That's the danger of an inexpensive kit (in my case an untouched 40 year old one) and an over zealous mind. I started with the zimmerit, then the bazooka shields. Followed by the road wheels and tracks. now I just purchased grille screens. I realize once I get the wheels all lined up to my liking, the model progress should go fast and I hope my paint job is half as good as yours. |
|
|
|
Post by Leon on Jun 18, 2016 15:44:39 GMT -5
The only thing left for me to do is get a dust coat on and some mud effects to the lower hull! |
|
What's the finish you are aiming for...please say very dirty 
Markings make a big difference. 
I'll re paint the air intakes. 
