4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568 
|
Post by 4bogreen on Feb 13, 2016 7:20:40 GMT -5
 These decals are "normal" size, but i need "narrow" size. I can cut out the middle with the 5 and 8. The 3 i will have to get creative with. Exiting. |
|
|
|
Post by Tojo72 on Feb 13, 2016 9:39:13 GMT -5
Camo came out great.
|
|
|
|
Post by Leon on Feb 13, 2016 9:50:13 GMT -5
Nice looking camo! Good luck with numbers.  |
|
4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568
|
Post by 4bogreen on Feb 13, 2016 15:18:57 GMT -5
 ...and the result till now... |
|
4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568
|
Post by 4bogreen on Feb 13, 2016 17:32:48 GMT -5
I just made a little correction to the 3. The center was a bit to long....
|
|
|
|
Post by Leon on Feb 13, 2016 17:42:26 GMT -5
Nice correction on the numbers Remco! |
|
4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568
|
Post by 4bogreen on Feb 14, 2016 13:28:29 GMT -5
Thanks Idor!
I made some other corrections to the numbers, by adding some lenght (3mm) to the lower section. They were to small. Now sprayed the tires dark grey and taped the section for the white band. Also painted the inside of the canopy sections green.
|
|
|
|
Post by wbill76 on Feb 14, 2016 17:56:35 GMT -5
Looks like you've found the perfect solution to the numbers problem.  |
|
4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568
|
Post by 4bogreen on Feb 15, 2016 2:04:53 GMT -5
Hi Bill!
It was a very complicated cut-up. Especialy now i added the 3mm longer. It looks like a puzzel. I think i have a job for the panzer aces jar "stencelit color" to fill the small gaps....
|
|
4bogreen
Full Member
Member since: January 2014
On the bench; Yak-1B, T-30, T-34 model 1940
Posts: 568
|
Post by 4bogreen on Apr 26, 2018 3:20:38 GMT -5
Hi Bill! It was a very complicated cut-up. Especialy now i added the 3mm longer. It looks like a puzzel. I think i have a job for the panzer aces jar "stencelit color" to fill the small gaps.... Unfortunaly the camouflage was not sufficient enough. Some rims with paint have been around the masking, so i sanded the whole model. The decals were also a bit to thick and had some silvering. So luckely i found some replacement decals (it cost something, but then you have something). Now i have Eagle strike 48059 British thorougbreds Spitfire mkV. These decals have the stencelits and the right EP markings. Its EP120, but its easy to switch the numbers to EP210. Foxbot 48-001. These contain Yak-1 numbers and stencelits. The numbers are very good, and need a minor adjustment and are good to go.  |
|
