Post by maschinenkrueger on Mar 3, 2020 12:09:31 GMT -5
I've started yet another MK44 the other week. I had almost enough parts in the bin to make a WhiteKnight but not quite. The most challenging bit so far was the shin guards. I first started with a plastic soup spoon handle but the plastic was immune to any form of adhesive. I had to draw form styrene sheet over the handle to get something usable. The nose bit is Wave g-tanks with putty. The arms are also lengthened about 6mm/.25".
Post by maschinenkrueger on Apr 1, 2020 23:17:26 GMT -5
This is #8
Hand painted with Vallejo Model Colors over a matte black base. Worn paint is actual worn paint. I wet sanded with 800 grit sanding sponge. A little light drybrushing with dark grey softened some of the marks. A cot of Gunze Semi Gloss from a rattle can was applied.
I changed the laser to a boom stick scratch built from styrene tube and parts from the Hammer Knight.