brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 22, 2024 10:38:23 GMT -5
I think these wrecks would fit better than this kit. Unfortunately, this kit is too big for a dio. I'll get it whipped into shape, but there will be some eye rolling and head shaking and most likely HEAT involved.
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 22, 2024 11:28:34 GMT -5
OMG !!! How did I NOT see this before?
I talked nice to her, I bought her drinks and she was really starting to come around to my ideas.
However, I seem to have overlooked an important piece or two, or 5 of this kit. Like the ENTIRE NOSE of the aircraft.
145, 146, 147, 148, 149 are no where to be found. I could have sworn I had those. Good grief!! Okay, well it's back on the box while I figure out/decide what I'm going to do. I was actually making good headway as well. DANGIT !!!
|
|
jeaton01
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Sept '23 Showcased Model Awarded
Member since: October 2013
Posts: 1,171
Oct 3, 2013 22:10:29 GMT -5
Oct 3, 2013 22:10:29 GMT -5
|
Post by jeaton01 on Jul 22, 2024 12:09:02 GMT -5
That second photo has got to be a movie prop!
|
|
|
Post by 406 Silverado on Jul 22, 2024 12:24:29 GMT -5
OMG !!! How did I NOT see this before?
I talked nice to her, I bought her drinks and she was really starting to come around to my ideas.
However, I seem to have overlooked an important piece or two, or 5 of this kit. Like the ENTIRE NOSE of the aircraft.
145, 146, 147, 148, 149 are no where to be found. I could have sworn I had those. Good grief!! Okay, well it's back on the box while I figure out/decide what I'm going to do. I was actually making good headway as well. DANGIT !!!
Oh man. I just got through looking up the panels on ebay hoping to find a good deal and you'd be better off purchasing another kit as between the 3 engine panels alone you're lookin' at over $60 and that's before tax. The only other thing that you could ponder is that Jeremy (fermis) I think has one of these kits still. Hope you get it all sorted out as I'm looking forward to watching you build this one Brandon.
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 22, 2024 12:24:35 GMT -5
That second photo has got to be a movie prop! I thought that too. The pilot looks very out of place and fake to my eyes.
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 22, 2024 12:26:40 GMT -5
Okay, now that I have kicked both dogs and yelled at the wife I looked in my 1/24 P-51 kit and guess what I found? Just kiddin' about yelling at the wife, I'm not suicidal.
Crisis over, moving on...
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 22, 2024 14:43:07 GMT -5
The order of operations for assembly on this ill fitting kit has been tossed out the window and I am pressing on with getting things to fit correctly. I am gaining ground on the pit work as well as the engine and nose assembly. This won't take long to put together, but cleaning up the parts will take some time.
I glued up the pit floor and its parts and then added the parts to the side fuselage rather than to the floor as the instructions would like. It fits and looks far better this way. I attached the front bulkhead to the floor and have it drying in the fuselage to make sure everything is where it belongs before I go to paint everything. I can see I'll need a small amount of scratch work to fill in some gaps and holes, but nothing to awful.
|
|
kyledehart5
Forum Moderator ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png)
Dec '23 Showcased Model Awarded
Member since: July 2023
Posts: 6,143
Member is Online
MSC Staff
Jul 29, 2023 13:13:15 GMT -5
Jul 29, 2023 13:13:15 GMT -5
|
Post by kyledehart5 on Jul 22, 2024 15:53:24 GMT -5
Ahhh. Thank goodness you found the parts!!
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 23, 2024 12:44:03 GMT -5
Well since that crisis was averted I have moved on to more assembly, or repeated dry fitting until I get assembly. Anyway, I was missing half of a tube and this part will be seen from underneath through the radiator opening so I had to come up with something. Here is a pic of the part.
Part #22 or half a tube. Not something that lends itself to easy scratch building.
Basically I needed to create the other side of this... Then I had an idea. How about trying some UV resin and run a bead along the part and harden it up. So I gave it a go. Here is the result.
And when viewed from the side, it is a perfect match. Problem solved. Man this stuff is great to work with.
Total time to work this up, about 5 min. Awesome!!
|
|
cbaltrin
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Member since: January 2024
Posts: 222
Jan 20, 2024 17:00:59 GMT -5
Jan 20, 2024 17:00:59 GMT -5
|
Post by cbaltrin on Jul 23, 2024 13:07:18 GMT -5
Wow that worked out pretty well, Brandon! That UV resin must be pretty thick? On a sidenote, I love that you’re doing this build. This would almost be the holy Grail nostalgia built for me. I might have to grab this kit one day. Can’t wait to see how this turns out.
|
|
brandonk
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 1,091
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jul 23, 2024 14:00:22 GMT -5
Wow that worked out pretty well, Brandon! That UV resin must be pretty thick? On a sidenote, I love that you’re doing this build. This would almost be the holy Grail nostalgia built for me. I might have to grab this kit one day. Can’t wait to see how this turns out. It's about the thickness of honey you store in the fridge. Pretty slow moving.
|
|
kyledehart5
Forum Moderator ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png)
Dec '23 Showcased Model Awarded
Member since: July 2023
Posts: 6,143
Member is Online
MSC Staff
Jul 29, 2023 13:13:15 GMT -5
Jul 29, 2023 13:13:15 GMT -5
|
Post by kyledehart5 on Jul 23, 2024 16:45:57 GMT -5
Wow that’s awesome!! Great workaround!
|
|
handiabled
Administrator ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png)
Member since: February 2023
Posts: 3,681
MSC Staff
Feb 7, 2023 9:33:32 GMT -5
Feb 7, 2023 9:33:32 GMT -5
|
Post by handiabled on Jul 24, 2024 8:39:39 GMT -5
That is some pretty ingenious scratchwork! It looks fantastic!
|
|