cploverby
Full Member
Member since: August 2012
Posts: 129
Aug 14, 2012 14:15:54 GMT -5
Aug 14, 2012 14:15:54 GMT -5
|
Post by cploverby on Aug 31, 2012 23:55:24 GMT -5
About 20 some odd years ago I did this in 1/87. So once Revell came out with the M2/M3 Bradley (kit 03143) I decided to try it with the Hammerhead from ESCI's M901. This is what I started with. Here is where I am when I decide to take a break. well it's after Midnight so I'll call it quits for now.
|
|
cploverby
Full Member
Member since: August 2012
Posts: 129
Aug 14, 2012 14:15:54 GMT -5
Aug 14, 2012 14:15:54 GMT -5
|
Post by cploverby on Sept 3, 2012 7:19:27 GMT -5
Well "inspite" of Nay Sayers on weather or not this is a viable vehicle .... The progress contenues Here it is with a new roof: Here are the parts from ESCI's Hammerhead: Now, the TC hatch on the Hammerhead is molded closed, as shown here: So I have taken the parts from ESCI's M113, Namely the TC hatch, so that I can add it to the Hammerhead mount: I took the Hemmerhead mount, and sanded down the hatch till the M113 TC hatch fit to it: I will add a MG ring and look for an M60/M60D for mounting to it. If any questions, feel free to reply.
|
|
paulh
Senior Member
Member since: November 2011
build, fail, learn, succeed - ENJOY
Posts: 2,389
Nov 15, 2011 15:54:51 GMT -5
Nov 15, 2011 15:54:51 GMT -5
|
Post by paulh on Oct 12, 2012 3:10:45 GMT -5
I'm lovin' this. ;D No questions yet other than- you nearly finsihed yet or what? ;D P
|
|