|
|
Post by robbo on Feb 17, 2012 15:29:26 GMT -5
Bugger painting that one CB, rather you than me mate
|
|
rm6239.
Full Member
Member since: November 2011
Ross Moore
Posts: 252
Nov 19, 2011 5:04:13 GMT -5
Nov 19, 2011 5:04:13 GMT -5
|
Post by rm6239. on Feb 18, 2012 23:07:41 GMT -5
Hey CB
Very nice engine mate, looking forward to seeing you paint it.
cheers
Rossco
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 19, 2012 5:26:39 GMT -5
Well chaps,sorry to keep you waiting for more piccies,but I've only just managed to upload them Pete...sorry mate,no detailing on this'n...maybe on the 'Stang  Chris 67...No AB'ing as yet...just too cold in me shed. Mark...good to see you here mate,You'd love one of these ;D Chris S....You don't need to stay in the corner anymore..... Hey Boss...good to see you drop by Spud,Chester....cheers for the comments  Robbo....painting migt be a bit awkward in places,but hopefully she'll turn out half decent. Rossco...cheers mate. Piccy update in a mo.......... |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 19, 2012 5:35:46 GMT -5
Ok,Now for a few pics.....Elevators made up....   The2 small pieces of PE are the attachments so that they can be posed.There is a thin steel rod in between the two halves.  Lower wing,with u/c wells fitted...and a detail shot of one of the bays  Next ..a coupla pics showing the sublime fit...    a very small gap in the last piccy,just didn't tape it tight enough! And as everyone does...a dry fit of all components thus far...    Hope you likee!!!! ;D |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 19, 2012 16:34:22 GMT -5
Cheers mate,you're a goodun!! ;D
|
|
|
|
Post by robbo on Feb 19, 2012 16:43:09 GMT -5
Sorry CB forgot I'd looked at this one the other night
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 19, 2012 16:50:02 GMT -5
That's alright mate....old age does that to a fella!! |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 19, 2012 17:38:32 GMT -5
CHEERS NEEMS!!!! ;D ;D ;D
|
|
|
|
Post by TRM on Feb 19, 2012 17:48:20 GMT -5
Looking great CB!!! Keep it going!!!
|
|
multicam
Senior Member
Member since: January 2012
Nate
Posts: 2,039
Jan 10, 2012 14:35:41 GMT -5
Jan 10, 2012 14:35:41 GMT -5
|
Post by multicam on Feb 20, 2012 21:35:12 GMT -5
Looks great Chris!
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 21, 2012 18:05:10 GMT -5
Cheers 'Theo'.....I'll try...ChrisS,I've never had a kit fit this well,long may it continue!!.Cheers ,Nate....I appreciate the feedback,mate!
|
|
rm6239.
Full Member
Member since: November 2011
Ross Moore
Posts: 252
Nov 19, 2011 5:04:13 GMT -5
Nov 19, 2011 5:04:13 GMT -5
|
Post by rm6239. on Feb 22, 2012 3:57:53 GMT -5
Chris
Looking good mate.
cheers
Rossco
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 27, 2012 15:51:59 GMT -5
Chris,and Ross,cheers guys....... ...another quick update... Assembled the office,and dry fitted for the piccies....again the fit is superb,and very little clean up! I haven't gone to the trouble of drilling the two bulkheads behind the pilot,like Gary Radford did on his build      Next step,is to prime and paint....ACW,as usual.... |
|
|
|
Post by Mence on Feb 27, 2012 16:02:20 GMT -5
Nice detail CeeBee, clean work!
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 27, 2012 16:40:32 GMT -5
Cheers chaps ;D ;D ;D...Chris and Neems,the plates behind the pilot,the compass mount and the tank release lever come on a PE sprue,supplied with the kit.Just gotta find the other rudder pedal now... Chris S,which one are ya doing?  |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 27, 2012 17:04:59 GMT -5
I've got the Pacific Coast MkI,with the metal wings...
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 27, 2012 17:16:54 GMT -5
You do like a challenge,don't ya??? ;D ;D  |
|
modelfreak72
Full Member
Member since: January 2012
Why worry, each of us is wearing an unlicensed nuclear accelerator on his back.
Posts: 1,479
Jan 28, 2012 23:21:46 GMT -5
Jan 28, 2012 23:21:46 GMT -5
|
Post by modelfreak72 on Feb 28, 2012 0:10:36 GMT -5
Hey CB, Coming along great! Can't wait to see the office with the instrument panel! More please!
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Feb 28, 2012 18:53:05 GMT -5
Pete...thanks for dropping in.....hope this comes up to your standards mate!! ....The IP is not an easy thing for me to get right,cos it's got PE,so I'm taking my time on that part....then hopefully,I can throw everything together!!!!! |
|
|
|
Post by 406 Silverado on Feb 28, 2012 19:01:36 GMT -5
nice clean work on the office Cb
|
|
modelfreak72
Full Member
Member since: January 2012
Why worry, each of us is wearing an unlicensed nuclear accelerator on his back.
Posts: 1,479
Jan 28, 2012 23:21:46 GMT -5
Jan 28, 2012 23:21:46 GMT -5
|
Post by modelfreak72 on Mar 3, 2012 15:56:27 GMT -5
Hey chrisb, I have no standards Sit back, take your time, get it to where you like it! That's all that counts! Now where are the new pics? ;D |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Mar 8, 2012 15:37:08 GMT -5
Hi Chrisb, nice build! I love the detail on that Merlin ;D its got detail I could only dream of on my 1/24 airfix offering. Great work on the office too  Cheers Steve |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Mar 8, 2012 16:11:24 GMT -5
Cheers,Boss....That sounds nice coming from you sir!... ....Pete,sorry mate,no more pics yet,I was Ordered to start my 262 for the Messerschmitt build,so this has been put aside slightly! .Cheers Steve...I think you'd love one of these Tammy 1/32 kits......or How about the 1/32 'Raider that has just come out!!!! ;D ;D |
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Mar 8, 2012 16:48:22 GMT -5
;D ;D......Yes,Chief....At once....Chief... |
|
rm6239.
Full Member
Member since: November 2011
Ross Moore
Posts: 252
Nov 19, 2011 5:04:13 GMT -5
Nov 19, 2011 5:04:13 GMT -5
|
Post by rm6239. on Mar 9, 2012 5:32:00 GMT -5
Chris
Love the office mate, looking forward to seeing more.
cheers
Rossco
|
|
jackh.
Full Member
Member since: December 2011
Posts: 1,195
Dec 15, 2011 2:51:27 GMT -5
Dec 15, 2011 2:51:27 GMT -5
|
Post by jackh. on Mar 11, 2012 13:41:33 GMT -5
Fine progress CB, nice start on the office.
|
|
|
|
Post by robbo on Mar 11, 2012 17:08:13 GMT -5
Nice office CB
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 22, 2024 13:33:32 GMT -5
Nov 22, 2024 13:33:32 GMT -5
|
Post by Deleted on Mar 12, 2012 13:32:10 GMT -5
Ok,chaps....a quick update,if I may...Over the weekend,I managed to prime a few parts,and then today I got some colour on them. The fuselage interior is Tammy AS12 Bare Metal Silver,and AS 29 Grey/Green,as is the floor of the office,between the wings.  Office and engine frame,again in AS29     and finally the engine is now the right? colour as well...(Tammy Semi Gloss black)   The AS29 is a tad light for the cockpit colour,but that should darken out with a Flory wash. As usual ACW ;D ;D |
|
multicam
Senior Member
Member since: January 2012
Nate
Posts: 2,039
Jan 10, 2012 14:35:41 GMT -5
Jan 10, 2012 14:35:41 GMT -5
|
Post by multicam on Mar 12, 2012 20:48:06 GMT -5
Looking great Chris. Ill be watching for more |
|
|
|
Post by armorguy on Mar 13, 2012 1:50:26 GMT -5
A good start Chris !
|
|
