|
Post by tonylee on Aug 7, 2013 17:58:49 GMT -5
Howdy Again In between track work on the M12 I painted and added a few more parts= air filters,seats,a little container on the left rear step and the recoil spade. Appreciate you comin by the shop Tony lee
|
|
|
Post by Teabone on Aug 7, 2013 19:53:19 GMT -5
Tony
I have to hand it to you being able to do such a good job on two models at the same time. I have tried two at the same time a couple of times with disastrous results as it seems to bog down the build to the point where I make mistakes and end up not liking ether build. You are a true multitasker.
Bones
|
|
|
Post by wbill76 on Aug 7, 2013 19:58:44 GMT -5
Uncle T's got the factory humming again, nice progress there sir.
|
|
|
Post by tonylee on Aug 7, 2013 21:01:43 GMT -5
The trick or secret to it all Bones is remembering which sardine can full of parts goes to which model. Yeah Baby Tex Thanks guys Tony lee
|
|
|
Post by Teabone on Aug 7, 2013 23:00:02 GMT -5
That is my problem I get confused about the cans.
Bones
|
|
modelfreak72
Full Member
Member since: January 2012
Why worry, each of us is wearing an unlicensed nuclear accelerator on his back.
Posts: 1,479
Jan 28, 2012 23:21:46 GMT -5
Jan 28, 2012 23:21:46 GMT -5
|
Post by modelfreak72 on Aug 8, 2013 0:20:24 GMT -5
Lookin good Uncle T!
|
|
Deleted
Member since: January 1970
Posts: 0
May 19, 2024 4:49:27 GMT -5
May 19, 2024 4:49:27 GMT -5
|
Post by Deleted on Aug 8, 2013 15:27:07 GMT -5
Big Differences!
|
|
|
Post by tonylee on Aug 8, 2013 15:40:44 GMT -5
Appreciate it my friends and brothers Tony lee
|
|
|
Post by Leon on Aug 8, 2013 15:48:26 GMT -5
Looking really good Tony :)whats next for this beast?
|
|
|
Post by tonylee on Aug 8, 2013 16:46:18 GMT -5
Well lets see Leon. I've got a couple of touch up spots that I missed and a few more parts to install after I get the tracks colored up.
I guess the tracks. Tony lee
|
|
thug626
Senior Member
Member since: January 2013
Posts: 1,813
Jan 15, 2013 13:05:28 GMT -5
Jan 15, 2013 13:05:28 GMT -5
|
Post by thug626 on Aug 9, 2013 12:26:36 GMT -5
I always have enjoyed what rolls off of the "Tony Lee Open Air Arsenal Line". Absolutely splendid work! Dave
|
|
|
Post by tonylee on Aug 12, 2013 22:17:34 GMT -5
Monday Update Tools: Had to watch "Longmire" before posting this,hope you don't mind. BTW Thanks Dave Tony lee
|
|
|
Post by Teabone on Aug 12, 2013 23:09:56 GMT -5
Tony
Nice work as usual, saw how you were doing a three pack on this at TL the other day. I like the little touch with the shovel leaning by the spade winch, those little things make it real for me.
Bones
|
|
|
Post by bullardino on Aug 13, 2013 8:45:46 GMT -5
Tony, I just caught up on this build and I must say it's a stunner. All the details are really spot on
|
|
|
Post by wbill76 on Aug 13, 2013 21:09:49 GMT -5
Always neat to see the tools go on, nice work Tony, you can be excused for the Longmire delay.
|
|
|
Post by bbd468 on Aug 19, 2013 21:46:02 GMT -5
Hello brother Tony, Ive been off movin from Mckinney Tx to Dallas and tryin to catch up a bit. The Green beast is lookin fine buddy....always a pleasure to watch your SPG builds, especially tha green-uns!
|
|
|
Post by tonylee on Aug 21, 2013 19:52:13 GMT -5
Hey Still adding details to the front: Since I found another AFV Club M40 kit i've also built the 203mm piece for the M43 conversion. Until next time boys and girls Tony lee
|
|
|
Post by Leon on Aug 21, 2013 19:58:24 GMT -5
Great detail work Tony,looking forward to your next update.
|
|
|
Post by wbill76 on Aug 21, 2013 20:05:12 GMT -5
Wondered what had happened to you there Tony, was afraid you might have floated away with all the rain! Nice to see this one moving again, details look good.
|
|
|
Post by tonylee on Aug 21, 2013 20:56:03 GMT -5
Thank You Kindly I've been given the old back a breather and not spendin so much time humped over the bench. I do a little bit and leave it till the next day and there ain't been much to post on a daily basis. Better than nothing don't ya know Tony lee
|
|
pt109
Full Member
Member since: April 2013
Stop staring at me! heheheh
Posts: 491
Apr 15, 2013 23:52:11 GMT -5
Apr 15, 2013 23:52:11 GMT -5
|
Post by pt109 on Aug 21, 2013 21:10:34 GMT -5
This is looking good Tony....
I think the little box on the left rear step is a binocular case?
Paul
|
|
|
Post by tonylee on Aug 21, 2013 21:26:30 GMT -5
Could be Paul could be and thanks. Tony lee
|
|
|
Post by deafpanzer on Aug 21, 2013 22:00:44 GMT -5
Great work on details!!! Keep it coming buddy...
|
|
|
Post by Teabone on Aug 21, 2013 23:37:35 GMT -5
Tony
I hope your back problem is not a continuing thing as I would be one to really miss the great work you do.
Bones
|
|
|
Post by wbill76 on Aug 22, 2013 20:41:53 GMT -5
Back issues are no fun, pace yourself Tony! We can't have the factory shutting down unexpectedly or you'll cause a crash in the green paint/OD production industry!
|
|
|
Post by bbd468 on Aug 22, 2013 20:47:03 GMT -5
Hello Tony. Buddy, i fell for ya....please take it easy fella. Well leave tha lights on for ya.
|
|
Deleted
Member since: January 1970
Posts: 0
May 19, 2024 4:49:27 GMT -5
May 19, 2024 4:49:27 GMT -5
|
Post by Deleted on Aug 23, 2013 4:08:34 GMT -5
Enlarged the pic of the front and could really enjoy all the detailed effort you've put into this model! Awesome!
|
|
beast
Full Member
Member since: August 2013
Posts: 410
Aug 13, 2013 16:34:06 GMT -5
Aug 13, 2013 16:34:06 GMT -5
|
Post by beast on Aug 23, 2013 14:51:08 GMT -5
Hey man, new to the board and just checked out your thread from start to finish. Brilliant work especially after seein what you started out with. Lookin forward to more updates!
|
|
|
Post by tonylee on Aug 23, 2013 17:35:15 GMT -5
Thank You, 8-)I appreciate your kind words.
Tony lee
|
|
|
Post by Leon on Aug 23, 2013 17:41:54 GMT -5
Take it easy on the old back Tony,no rush here.
|
|