|
|
Post by eastrock on Sept 3, 2013 10:42:40 GMT -5
For Editing; My Photo reference  The Box  The Goodies  The optional Hood  cheers!! |
|
|
|
Post by TRM on Sept 3, 2013 11:41:39 GMT -5
Sweet ER!! Nothing wrong with a nice Pony Build!! Bring it on!!
|
|
|
|
Post by Mence on Sept 3, 2013 12:17:06 GMT -5
Bring it on ER, I'm in!
|
|
|
|
Post by eastrock on Sept 3, 2013 17:15:28 GMT -5
Thanks Todd, Mence I'll use the cobra Jet hood option to make more menacing lol  |
|
|
|
Post by wbill76 on Sept 3, 2013 20:26:17 GMT -5
Cool project ER! Looking forward to this one.
|
|
|
|
Post by Leon on Sept 4, 2013 2:56:43 GMT -5
Count me in ER.  |
|
|
|
Post by eastrock on Sept 4, 2013 5:51:27 GMT -5
Nemo - going for the reference scheme Thanks Bill and Leon  Cheers!!! |
|
|
|
Post by eastrock on Sept 19, 2013 0:24:37 GMT -5
Ok guys time for some update on the Pony The Mock up interior  the problems that came with it lol, hope to do justice on the kit its a straight forward assemble but hinders with seams, gaps, injection pins and ejection marks..   and lastly the Seats need a lot of sanding scraping  |
|
venom1
Full Member
Member since: October 2012
Posts: 1,369
Oct 10, 2012 2:40:03 GMT -5
Oct 10, 2012 2:40:03 GMT -5
|
Post by venom1 on Sept 19, 2013 1:46:14 GMT -5
Oooo, a drivey thing.... shiny! Yer a better man than I ER, me and gloss don't get on so well! Cheers, Sam  |
|
Deleted
Member since: January 1970
Posts: 0
Dec 4, 2024 18:59:41 GMT -5
Dec 4, 2024 18:59:41 GMT -5
|
Post by Deleted on Sept 19, 2013 2:17:54 GMT -5
Those gaps may be a challenge but I'm sure you'll bring her into line, looking forward to see it come together |
|
|
|
Post by wbill76 on Sept 19, 2013 13:40:31 GMT -5
Time to get creative on those gaps! You can do it ER! |
|
|
|
Post by Mence on Sept 19, 2013 13:57:10 GMT -5
Yep, agree with Dicky, few challenges there but nothing you can't handle mate, looking forward to your next update....
|
|
|
|
Post by deafpanzer on Sept 19, 2013 20:42:11 GMT -5
Count me in! My friend had a '69 mustang... used to ride in often to school. Knowing you... you will make it work.
|
|
|
|
Post by Leon on Sept 20, 2013 4:04:26 GMT -5
Agree with the guys ER,you'll have this sorted in no time.
|
|
Deleted
Member since: January 1970
Posts: 0
Dec 4, 2024 18:59:41 GMT -5
Dec 4, 2024 18:59:41 GMT -5
|
Post by Deleted on Sept 20, 2013 7:24:24 GMT -5
Great attention to details!
|
|
|
|
Post by eastrock on Sept 20, 2013 10:49:24 GMT -5
Thanks for the words of encouragement guys, much appreciated! I've finished the cleaning the seats and somebody gave me a tip and check the hood and Alas see what I found his right!!!  Both sides  Scratching head back to shelf, close hood or repair and for the open hood? Cheers!! |
|
|
|
Post by `Boots` on Sept 20, 2013 13:05:57 GMT -5
What a great choice ER, i know it has a few small issues fella but you can make it work.........stick with it bro |
|
Deleted
Member since: January 1970
Posts: 0
Dec 4, 2024 18:59:41 GMT -5
Dec 4, 2024 18:59:41 GMT -5
|
Post by Deleted on Sept 20, 2013 13:28:12 GMT -5
Sand the pins down on the inside of the fender wells and that should let it fit up snug.
|
|
|
|
Post by eastrock on Sept 20, 2013 21:16:11 GMT -5
Thanks Boots it got issues after the another Bruce, It a gradual as possible, I might not use the screws in the end. Nemo, would mind smiting me a bit of your styrene godly powers? lol Btw Here's an Engine Mock  |
|
|
|
Post by bbd468 on Sept 20, 2013 21:25:58 GMT -5
OH SWEEEET! Great build brother ER! Im in from here on out. I only have 1 car kit in my stash and its this very same kit. Im gonna build it sometime mid-late next year so ill be takin notes and copy and pasting pics over to my reference folders. If you dont mind of course. |
|
|
|
Post by eastrock on Sept 20, 2013 23:13:39 GMT -5
OH SWEEEET! Great build brother ER! Im in from here on out. I only have 1 car kit in my stash and its this very same kit. Im gonna build it sometime mid-late next year so ill be takin notes and copy and pasting pics over to my reference folders. If you dont mind of course. Glad you come along Brother Gary, will do my best to post the issue, to give you a head start on your Mustang and Btw Thanks to Bruce Aka Dogfish, your tip works the gap was reduce to less than 1mm Cheers!!! |
|
|
|
Post by eastrock on Sept 23, 2013 8:42:58 GMT -5
|
|
Deleted
Member since: January 1970
Posts: 0
Dec 4, 2024 18:59:41 GMT -5
Dec 4, 2024 18:59:41 GMT -5
|
Post by Deleted on Sept 23, 2013 14:28:04 GMT -5
Making good progress buddy |
|
|
|
Post by deafpanzer on Sept 23, 2013 20:54:34 GMT -5
You are getting there... looks like you are having too much fun addressing those gaps. How's the weather?
|
|
|
|
Post by eastrock on Sept 24, 2013 8:45:50 GMT -5
Thanks Steve!!! Andy, the weather is good, having a cold breeze... the storm already left |
|
|
|
Post by bbd468 on Sept 24, 2013 9:52:38 GMT -5
ER, there seems to be quite a few fit issues, is it a total pain in the A$$ or very manageable? Gonna take notes on this and put away for when i build mine. |
|
|
|
Post by eastrock on Oct 5, 2013 10:19:42 GMT -5
Manage to work on the hood, still need to do a bit of polishing on the edges still have visible marks...  Engine got painted but with tiny bit of paint mishap on the one of the valve covers...   Cheers!!! |
|
|
|
Post by bullardino on Oct 5, 2013 11:27:57 GMT -5
They are two! How did I miss them all |
|
|
|
Post by eastrock on Oct 5, 2013 17:15:11 GMT -5
Actually I got to finished kits lol... I'll be hiding again using my Ghillie suit lol
|
|
|
|
Post by deafpanzer on Oct 10, 2013 22:14:42 GMT -5
Nice work on the engine!!!
|
|
Scratching head back to shelf, close hood or repair and for the open hood?
