panzerman75
Full Member
Member since: February 2012
Posts: 292
Feb 19, 2012 1:07:13 GMT -5
Feb 19, 2012 1:07:13 GMT -5
|
Post by panzerman75 on Feb 26, 2012 20:47:39 GMT -5
Hey guys im gonna be starting a elefant but i hate to use the stiff metal cables that you get from dragon. So i was going to buy so copper tow cable from Karaya but the problem is is that im not to sure what the diameter of it is so if anyone can help i would greatly appreciate it thanks. Phil
|
|
|
Post by wouter on Feb 27, 2012 13:54:40 GMT -5
Hi mate, I have used some cables for my Elefant from Eureka XXL: very nice in detail and much better than the stiff cables. They also provide the 'right' size of cable per AFV, so they have a seperate set for the Ferdinand/Elefant. And it ain't very expensive as well ^^ www.eurekaxxl.com/towing-cables-35/er-3527-towing-cable-for-sd-kfz-184-elefant-spgyou can check on their site if they sell the stuff in your vicinity Cheers
|
|
panzerman75
Full Member
Member since: February 2012
Posts: 292
Feb 19, 2012 1:07:13 GMT -5
Feb 19, 2012 1:07:13 GMT -5
|
Post by panzerman75 on Feb 27, 2012 14:26:51 GMT -5
Hey Dicky, Wouter thanx for the help i found a set from Eureka on ebay i appreciate the help guys ill be posting some pics of the build on here im hoping in the next few days.
Phil
|
|
|
Post by wouter on Feb 27, 2012 15:28:47 GMT -5
yes please, since I built the Elefant I must say I became fond of this Panzerjäger...it's a bit the grandfather of the JagdTiger ;D
So lookin' forward to see you stuff mate ^^
Cheers
|
|