|
Post by dupes on Sept 20, 2017 13:28:34 GMT -5
Man, has it been a while since I've posted anything. The seasonal business, as usual, puts a mega-damper on any of my forum involvement, and the whole Photobucket fiasco didn't assist my motivation at all either! Still trying to find a permanent home for all of my pics...hoping that these work out here. Started putting this one together last December right before Pearl Harbor Day - got a bit hung up on whether or not I wanted to go OOB or not, and open canopy or not. Lots of hemming and hawing which took about nine months to get over. OOB (with some Eagle Strike decals), closed canopy! What we're starting with: A little closer up to the relevant cockpit bits:
|
|
sturmbird
Full Member
Member since: June 2012
Posts: 1,406
Jun 21, 2012 13:51:45 GMT -5
Jun 21, 2012 13:51:45 GMT -5
|
Post by sturmbird on Sept 20, 2017 14:04:41 GMT -5
you do know that guys like you are steadily driving me bankrupt? Everytime I see some new airframe or a tank; I just gotta get one!!!!! gary
|
|
|
Post by dupes on Sept 20, 2017 15:59:51 GMT -5
you do know that guys like you are steadily driving me bankrupt? Everytime I see some new airframe or a tank; I just gotta get one!!!!! gary I mean, technically it's a 75+ year old airframe, but I won't hold that against you.
|
|
|
Post by Leon on Sept 20, 2017 17:57:40 GMT -5
Off to a nice start Dupes!
|
|
|
Post by TRM on Sept 20, 2017 21:24:01 GMT -5
Looking good Dupes! Let the frantic "end of the year" building begin!
|
|
|
Post by wing_nut on Sept 20, 2017 21:54:07 GMT -5
Looking forward to this. Are you going with the box art scheme?
|
|
|
Post by dupes on Sept 21, 2017 5:52:16 GMT -5
Looking forward to this. Are you going with the box art scheme? I'm not. I like that scheme (a lot), but the kit decals are getting pretty geriatric at this point, and the Eagle Strike set is muuuuuch thinner. IJN overall gray on this one!
|
|
|
Post by dupes on Sept 21, 2017 7:13:48 GMT -5
Cockpit is all done up, ready to be sandwiched in between the fuselage halves. Didn't go too overboard here, you'll see why shortly.
|
|
|
Post by dupes on Sept 21, 2017 11:16:32 GMT -5
Got the fuselage halves closed up around the cockpit - seemed like it was going to be a tight squeeze, but it worked nearly perfectly. Visibility is low, as expected, even more so once I get the canopy frames painted!
|
|
|
Post by wing_nut on Sept 21, 2017 12:17:06 GMT -5
Looking forward to this. Are you going with the box art scheme? I'm not. I like that scheme (a lot), but the kit decals are getting pretty geriatric at this point, and the Eagle Strike set is muuuuuch thinner. IJN overall gray on this one! PM inbound
|
|
|
Post by dupes on Sept 21, 2017 12:22:28 GMT -5
Ooooh, mysterious!
|
|
|
Post by Leon on Sept 21, 2017 13:09:00 GMT -5
Nice work on the pit Dupes!
|
|
|
Post by dupes on Sept 29, 2017 21:55:27 GMT -5
Still hopeful I can have this one completed before COB tomorrow night - i.e., before the September MoM deadline! Got all of the parts prepped for paint. Canopy panes masked off with a set from Montex - HUGE time saver. Sprayed the interior green first so any IPMS judge with a flashlight would see the right color on the inside. Then on to the IJN Gray! Did a bunch of alternate colors on the panels, looks a bit washed out here, very hard to see. Will try to get better angles for final pics. Masked off the nose with Tamiya curve tape: And then it was time for decaling. Long-OOP Eagle Strike set (2001), but the went down PERFECTLY. LOTS more tomorrow!
|
|
|
Post by dierk on Sept 30, 2017 4:35:37 GMT -5
Lovely! I really like Japanese planes!
|
|
|
Post by Leon on Sept 30, 2017 4:36:32 GMT -5
Looking really good Dupes!
|
|
ajcmac
Full Member
Member since: October 2013
Posts: 146
Oct 19, 2013 15:59:36 GMT -5
Oct 19, 2013 15:59:36 GMT -5
|
Post by ajcmac on Sept 30, 2017 5:07:47 GMT -5
Beautiful. Congratulations.
Regards
ajcmac
|
|
|
Post by TRM on Sept 30, 2017 15:56:22 GMT -5
Looking good Dupes! Great work on the markings!
|
|
|
Post by dupes on Sept 30, 2017 18:28:16 GMT -5
Thanks fellas! Looking good Dupes! Great work on the markings! And thank you, sir. FYI - it WILL be completed shortly. Commencing final assembly now then I just need to edit some pics.
|
|
|
Post by dupes on Sept 30, 2017 20:42:05 GMT -5
|
|
|
Post by TRM on Sept 30, 2017 21:44:37 GMT -5
Great finish Dupes! Nice job getting this under the wire for the MoM! Typeset is complete, just waiting to pull the trigger!
|
|
Rick
Full Member
Member since: March 2013
what to build, what to build . . . Ok THAT one!
Posts: 854
Mar 3, 2013 9:59:21 GMT -5
Mar 3, 2013 9:59:21 GMT -5
|
Post by Rick on Sept 30, 2017 23:41:10 GMT -5
Nicely done Dupes!
|
|
|
Post by dierk on Oct 1, 2017 3:57:52 GMT -5
Good result! Well done on the speedy finish
|
|
|
Post by Leon on Oct 1, 2017 4:40:27 GMT -5
Great finish Dupes!
|
|
|
Post by dupes on Oct 2, 2017 7:15:04 GMT -5
Hey, thanks guys! Trying to figure out what to wrap up next for the fall contests...hmmmm.
|
|
Tojo72
Forum Moderator
Sept '24 Showcased Model Awarded
Member since: November 2012
Posts: 5,338
Member is Online
MSC Staff
Nov 14, 2012 19:46:28 GMT -5
Nov 14, 2012 19:46:28 GMT -5
|
Post by Tojo72 on Oct 2, 2017 10:26:16 GMT -5
Beautiful job Dupes,looks great.
|
|
|
Post by `Boots` on Oct 10, 2017 14:03:37 GMT -5
Absolutely first class Dupes............as per usual
|
|
|
Post by dupes on Oct 11, 2017 17:34:44 GMT -5
Thanks Tojo! Absolutely first class Dupes............as per usual Thanks Boots! Where have you been hiding out lately? Long time no see!
|
|
|
Post by `Boots` on Oct 21, 2017 15:21:40 GMT -5
Eey oop fella..........i been here and there mate , not doin` much at the mo apart from trying to locate the mojo!!, it doesn`t seem to wanna come out and play !, i been pushing some paint around on the odd occasion but apart from that...nowt!, you seem to be doin` alright and ya certainly still have that special touch when it comes to the wingies fella
|
|
sturmbird
Full Member
Member since: June 2012
Posts: 1,406
Jun 21, 2012 13:51:45 GMT -5
Jun 21, 2012 13:51:45 GMT -5
|
Post by sturmbird on Oct 21, 2017 19:41:53 GMT -5
I'd like to see somebody like Hasegawa, or Tamiya do this airframe in 1/32 scale. gary
|
|
ironhand6
Full Member
Member since: March 2013
Posts: 280
Mar 17, 2013 20:54:02 GMT -5
Mar 17, 2013 20:54:02 GMT -5
|
Post by ironhand6 on Dec 14, 2017 23:09:54 GMT -5
Fantastic job! The scallop on the cowl is really well done
|
|