101st AIRBORNE AT CARENTAN, JUNE 1944

[Steve Zuleski]

120mm Figures Sculpted by Maurice Corry, offered by Mitches Military Models.

Back in the warm waters of Olive Drab and Khaki tones, after the “Battle of the Tartans”, I pulled from my stash a really great couple of figures that have been itching to be worked. Initially there would have been a total of eight figures in this dio, but I scaled it back for lack of space when completed. My curio cabinet is getting full.

In this build there will be four 120 mm, Maurice Corry figures and a Freedom Model Kits 1/16th German Sd.kfz.2 Kettenkraftrad Typ HK 101. Starting off with some really great poses from Maurice Corry’s Airborne figure sets I couldn’t pass up this pair representing the iconic photo of the 101st AB in Normandy holding the Nazi flag. There are two represented from that famous photo and two others, A GI holding a German prisoner at bayonet point.

The initial set from that iconic photo doesn’t appear to be available anymore, but the second set is still shown on the second page as available, 120mm Us Airborne Private with German POW.
www.mitchesmilitarymodels.co.uk/120mm-models?page=2

The Freedom Model Kits 1/16th German Sd.kfz.2 Kettenkraftrad Typ HK 101 is still available and is reasonably priced for this kit, IHMO. It even comes with a driver, not bad.

Now I know some of you are going to mention that 120mm and 1/16th scales don’t mix. True, but it’s all in the presentation, right? So, I will work with a little optical illusion when placing that Sd.kfz.2. I haven’t quite figured out the scenario just yet, but there will be some small structure and lots of rubble within the scene. Point being, I need to keep my figure work going and these figures were in the cue.

These four resin figures themselves have some really great usable poses which makes for so many possibilities in dio placement. Clean-up was pretty much as per usual, nothing too far out of the ordinary, the casting was good. I did have to make a few minor alterations, some of the parts weren’t fitting as well as they should have, but nothing drastic.

The rifle straps were made from sheet pewter and some copper wire for the lugs, and a few other parts. I also made a pair of glasses for the GI with the flag. They appear a bit on the thick side, so I may scour for a bit thinner wire, but that will be towards the end of the build. Lastly, the figures were given a primer coat of Floquil Primer, oil based, to help identify any areas missed and prep for the base tone color application.

Freedom Model Kits 1/16th German Sd.kfz.2 Kettenkraftrad Typ HK 101 is now in production and is available from several vendors. This is a decent kit so far and it appears to be going together nicely. This blog will not feature the Sd.kfz.2 build, per se, but is mainly about the Airborne figures and painting them. I will update the progress, but not with any SBS on this rig.



More to follow soon, the Sd has to be done before the figure work begins at full speed. Thanks for watching.

Cheers, Ski.

[chromdome35]

Can't wait to see what you do with this!

[mustang1989]

This should be one helluva build right here. Really looking forward to this one.

[Steve Zuleski]

Tanks, Gents! Working that trac bike right now.

[mustang1989]

Nov 22, 2022 8:10:03 GMT -5 Steve Zuleski said:

Tanks, Gents! Working that trac bike right now.

SO looking forward to this.

[Steve Zuleski]

Sorry for the delay, turkey is still digesting, HA! Thanks, Buddy!

Hope yall had a Happy Thanksgiving!

[mustang1989]

It wasn't bad at all. Four days off and ate like a complete idiot for two of those. Time to loose the acquired weight now. lol

[Steve Zuleski]

Ya, exactly, now the fun begins, burning it all off, HA!

A bit of a delay on the trak-bike. I'm relearning airbrushing and liquid masking. Oh well, ain't gonna get done looking at it, HA!

[mustang1989]

Nov 29, 2022 8:05:23 GMT -5 Steve Zuleski said:

Ya, exactly, now the fun begins, burning it all off, HA!

A bit of a delay on the trak-bike. I'm relearning airbrushing and liquid masking. Oh well, ain't gonna get done looking at it, HA!

Right there with ya Steve. This interior on the 2017 Camaro is kickin' my a$$ at the moment but I think I've got a direction to go that'll work. Like you say though, it aint gonna get done lookin' at it.

[reserve]

Sound like forced perspective will be your friend here...and besides, when's the last time you saw a group of five or six with everyone being the same height?

Ya got good materials to work with here will be lookin in

[Steve Zuleski]

Right O, Joe! It's all about the fun anywho.

Thanks, Mark. I've been getting my hinny handed to me by that liquid mask, not fun at all. It's been pretty much a redo for most of the camo pattern, by hand, yuk!

I'll post pics when it gets to a reasonably presentable stage, lol.

[mustang1989]

Right now I'm looking for a couple of new packages of Silly PUtty to replace my aged and paint infested putty. This stuff is the bomb when used for masking.

[Steve Zuleski]

That's looking good and my bookmarks are not functioning properly! I almost missed this. Sorry Joe.

[Steve Zuleski]

Loo, Kybo, Camode, Privy

Or is it just an outhouse? There are many names for taking care of business, but I’m calling this an “outhouse”. This little insignificant addition should bring the scenario to life and help tell the story. A very simple build using ½”x1/16” strips of pine milled on the band saw, plus a few other square strips of various dimensions. The hardware was made form sheet copper with copper wire for hinge pins and sewing pins were cut to size for attachment bolts. This took only a few days to knock out and was a nice diversion.



I made the potty bucket from sheet pewter and copper wire. Just a simple design since it won’t be seen up close.



After the structure was complete, I gave the entire build a wash of Burnt Sienna with a touch of Cadmium Orange oils. I coated all over, inside and out, to make sure the base tone was visible throughout. Next began the sun beat worn effect using Burnt Umber and Raw Sienna with Mig’s pigments, white or light tones only. Several Burnt Umber tinted washes were applied to slowly bring out a sun beat dusty appearance.

I had never done wood weathering with pigments in the past and found this method very simple with great results. It will now be a standard for my tool box of techniques.



Since this outhouse is intended to appear well used and having been in service for some time, I had to beat it up just a little, but not too much. I also wanted to bring out the weathering often found in wetter climates such as areas in Northern France. I tried to not overdo it, but I think this will work out just fine. Mig’s Slimy Grime Light and Dark came in handy for the subtle mold and mossing effects.

No outhouse would be complete without a few newspapers inside, not only for reading material, but for taking care of business. Reading material was printed from photos of WWII French newspapers found on line.



Once the outhouse is attached to the base, I will add boot prints and a bit more dusting, but for now, it will be set aside awaiting final installation.

Thanks for watchin. Cheers, Ski.

[Tobi]

Thanks for the language course!

I like loo. A German belittlement (among many others) when talking to kids is "making Lu-lu". Easy to remember. ;-)

[Steve Zuleski]

Bahahahaaaaaaaa, ya had me laughing, lol. Ya, there are many names for the same thing, too funny.

[chromdome35]

Why are you putting tape on top of the silly putty, to keep paint off of it?

[chromdome35]

That weathering on the outhouse is spot on. Great job!

[mustang1989]

Man, that is just crazy right there Steve. You got the "mess" just right in there. Fantastic ingenuity, construction and weathering throughout this small "diversion" piece. More like a "master" piece.

[Steve Zuleski]

Tanks, Gents. Working the trak-bike now.

[reserve]

Nice work sir this'll add interest to an empty corner

[Steve Zuleski]

Roger that, but it may become the focal point, HA! Stand by to stand by,...........

[Steve Zuleski]

OPR, Oil Paint Rendering

This trac-bike has been on the bench for a few weeks now getting a work over. I won’t go into too much detail on this portion of the dio, but just a minor update on progress. The real issue with this kit is the forks and the tracks, they are weak, IMHO. No worries, the worst is past, now the fun part, painting and weathering.

Using Mike Rinaldi’s “Tank Art” book series I am stepping away from the traditional weathering approach and trying something new, or at least to me it is. Oil Paint Rendering, or OPR for short, which is very thoroughly explained in book #4, German Armor. The SBS sequence is located at the end of chapter in each book for quick reference making for a pretty slick arrangement of the steps to follow.

Being an oiler at figure painting already, this OPR method is right up my alley. This really is a simple process, but it just takes a bit of practice, like everything else in this “Sport”.

I picked up the first four books a few years back, so now I’m ready to give it a go and see if I can incorporate this OPR method to its fullest. Kudos to Mike for such a well written and illustrated set of what I would consider essential volumes for armor geeks. Mike’s books can be found here: www.rinaldistudiopress.com/



Off we go,……….. This current camo pattern is not exactly accurate, but close enough for my purposes. My airbrush talents are lacking, so a true hand sprayed on pattern would have been a dismal disaster. I’ll run with this one and carry on. I did use elastic masking putty from AK Interactive. This stuff is great, my first time using it, but it’s rather tricky in tight spaces or on delicate details, so be aware of that if you’ve never used it. I also used the hairspray method for the chipping sequence. I still have a long way to go to feel comfortable with this method, but the possibilities are incredible. The biggest issue being “less is more” when it comes to chipping. It’s too easy to get carried away with the process and trash all that prior work only to end up with a redo.




So, as you can see there has been appreciable progress, but’s it’s slow going, especially learning a new technique and not wanting to jack it up, lol. I will use some pigments for mud work, but not much. I want to blend and fade using the oils and get the rust and dirt streaks down correctly. I’ll post the end results when it’s finished, but remember, I’m working to get to the AB figures, this is just a necessary next step to reach that goal.

Thanks for watchin. Cheers, Ski.

[chromdome35]

I've been looking at acquiring this series of books. Is there enough difference in #2 and #4 to consider buying them both? The aftermarket prices on #2 are all over $125.00

[Steve Zuleski]

Well gee wiz, talk about scalping, that's a crime. Book #2 is a treasure, so if you can find it cheaper, snag it. Get whatever you can now, they won't last and I think these won't be reprinted, as far as I know.

[chromdome35]

I just realized I miss asked my question. Tank Art 4 is an expansion of Tank Art 1 according to the descriptions I've read. Is it worth acquiring both #1 and #4 or would that be redundant and only 4 is necessary?

[mustang1989]

It's posts like this that inspire me to take on an armor project. After a couple more builds, I may just try my hand at one.

[chromdome35]

Steve, that is looking great! Having success with a new technique is always a good feeling.

[Tobi]

Jan 3, 2023 18:40:30 GMT -5 chromdome35 said:

I just realized I miss asked my question. Tank Art 4 is an expansion of Tank Art 1 according to the descriptions I've read. Is it worth acquiring both #1 and #4 or would that be redundant and only 4 is necessary?

Unfortunately I can't look them up for you at the moment, since I haven't moved them to my new home yet.

[Steve Zuleski]

Yes CD, #4 goes into depth on the OPR and other techniques. Remember, #1 was an intro, still loaded with intel, but I'm using #4 as the guide, #1 as the backup for minor details.

Jan 3, 2023 19:40:57 GMT -5 mustang1989 said:

It's posts like this that inspire me to take on an armor project. After a couple more builds, I may just try my hand at one.

Excuses, excuses, excuses, you keep laying out excuses Joe and you'll never take that leap. Procrastination is a killer. I say, close out your current project and take the dive, the water is warm and cozy.