|
|
Post by rbaer on Dec 20, 2022 17:41:59 GMT -5
I was starting the Academy K9 and was kind of thrashing around when somebody suggested I do a conversion to the KRAB, basically the K9 with a British AS90 turret and different gun. Sounded good to me, especially since I had a Trumpeter AS90 in the stash, so it was off to the races. I had to change a few things on the hull, the most involved being raising the rear corners and adding access doors. Other smaller things are different as well, but nothing major. The turret will be quite different with different NBC and AC units and a different gun tube. So far I've got a good start on the hull and gun tube, still looking for good detail pics of the back of the turret though. Proof of concept:  IMG_3722 by Russel Baer, on Flickr I had a decent start on the K9 hull, so a lot of stuff had to come off and get cleaned up:  IMG_3728 by Russel Baer, on Flickr I used plastic stock to build up the corners and do the access doors:  IMG_3774 by Russel Baer, on Flickr The gun tube needed stuff rearranged and changed, nothing a few hours with a razor saw, plastic tube stock and Aves 2-part putty couldn't fix:  IMG_3775 by Russel Baer, on Flickr I'll probably do the muzzle brake next, it's a big huge thing made up from plates rather than cast like the AS90 part is. |
|
|
|
Post by mustang1989 on Dec 21, 2022 6:16:43 GMT -5
A good start to a massive project it looks like Russ!! I just get a kick out of how you make stuff up as you go along, and it always turns out first class. You, good sir, bring alot of ingenuity to the table with these builds of yours.
|
|
|
|
Post by rbaer on Dec 21, 2022 8:56:04 GMT -5
Thanks Joe! I do admit to getting a real kick out of conversions and scratching parts out of "junk". The tan part on the gun tube is made from half of an M60 drive sprocket, chucked into a cordless drill, my "hand-held lathe". It took a fair amount of rummaging around in the stash to find something suitable, and once I got that started, the rest of it kind of fell together. I enjoyed that process as much as building and painting a kit OOB, probably more actually.
|
|
|
|
Post by rbaer on Jan 6, 2023 11:40:07 GMT -5
A quick shot of the gun tube and muzzle brake all in green. It's taken on one of my shelves of shame, only cos it's too big to fit anywhere else...  IMG_3778 by Russel Baer, on Flickr |
|
|
|
Post by mustang1989 on Jan 10, 2023 6:15:41 GMT -5
Now THAT'S a big gun!!!
I've got a couple of models that I really would like to build up but like this one, it takes up waaaay too much space when it's all said and done.
|
|
|
|
Post by rbaer on Jan 11, 2023 15:19:05 GMT -5
I was running out of room too, so I sold about 30 on eBay, otherwise I'd be boxing some up.
|
|
Prop Duster
Full Member
Member since: January 2013
just learned to spell CA. workin' on PE now.
Posts: 242
Jan 27, 2013 19:17:30 GMT -5
Jan 27, 2013 19:17:30 GMT -5
|
Post by Prop Duster on Jan 12, 2023 21:40:52 GMT -5
I was running out of room too, so I sold about 30 on eBay, otherwise I'd be boxing some up. sell on ebay? thats a thing?  I'm so old scool the blackboards still have chalk trays (if you don't know ask your parents  ) |
|
|
|
Post by mustang1989 on Jan 13, 2023 6:42:32 GMT -5
I was running out of room too, so I sold about 30 on eBay, otherwise I'd be boxing some up. Yeesh! I used to sell some things on Ebay but then they started taking a larger chunk of the profits and NOW if I were to sell over $600 worth, I'd be getting slapped with a 1099 as taxable income??!! WOW!!! I do get your point about the room though. I'm already eyeballing other display options. lol |
|
|
|
Post by Steve Zuleski on Jan 13, 2023 11:10:06 GMT -5
That's a HUGE gun on a tracked rig, sheesh!
Build a curio cabinet, move the wife's plates out and put in your models.
P.S. Be sure to have another curio cabinet ready for her, otherwise you'll be in the doghouse!
|
|
|
|
Post by Tobi on Jan 13, 2023 11:12:33 GMT -5
 With or without the dog?
|
|
|
|
Post by mustang1989 on Jan 14, 2023 7:35:56 GMT -5
With or without the dog? If I did that, it would be without the dog. The dog would be moved into the house. lol |
|
|
|
Post by rbaer on Jan 15, 2023 18:31:16 GMT -5
I need a dog first...
Space-wise, I'm jammed. I have three cabinets, two of them pretty big, in a 12x14 room along with my work area, a tool box and several file cabinets and bookcases. It's tight.
|
|
|
|
Post by mustang1989 on Jan 16, 2023 5:33:34 GMT -5
I need a dog first... Space-wise, I'm jammed. I have three cabinets, two of them pretty big, in a 12x14 room along with my work area, a tool box and several file cabinets and bookcases. It's tight. Sounds like it. Pics? |
|
|
|
Post by rbaer on Feb 15, 2023 18:43:36 GMT -5
Ugh.  IMG_3791 by Russel Baer, on Flickr  IMG_3792 by Russel Baer, on Flickr  IMG_3789 by Russel Baer, on Flickr I cleaned up my work area (really!) the other day, but the place is still pretty packed. And I haven't permanently shelved the KRAB, just waiting for... something, I don't know what. |
|
buddho
Forum Moderator 
Member since: February 2019
Posts: 1,287 
MSC Staff
|
Post by buddho on Mar 5, 2023 21:52:09 GMT -5
Beautiful conversion work on the K9, and I love your work and display areas.
|
|
|
|
Post by mustang1989 on Mar 6, 2023 6:07:40 GMT -5
I hear ya Russ!! Right now mines pretty tight too as I've got my son building his GIANT AT-AT in my modeling room. I have like NO space to work in right now. lol
|
|
buddho
Forum Moderator
Member since: February 2019
Posts: 1,287
MSC Staff
|
Post by buddho on Mar 6, 2023 7:42:59 GMT -5
I hear ya Russ!! Right now mines pretty tight too as I've got my son building his GIANT AT-AT in my modeling room. I have like NO space to work in right now. lol Id love to see that AT-AT! |
|
)
