philo426
Full Member
Member since: May 2023
Posts: 518
May 22, 2023 18:17:33 GMT -5
May 22, 2023 18:17:33 GMT -5
|
Post by philo426 on May 29, 2023 21:10:01 GMT -5
|
|
|
|
Post by 406 Silverado on May 29, 2023 21:18:55 GMT -5
I used to see this kit around......alot!!! How wsa this one to build Eugene? Good turn out BTW.
|
|
philo426
Full Member
Member since: May 2023
Posts: 518
May 22, 2023 18:17:33 GMT -5
May 22, 2023 18:17:33 GMT -5
|
Post by philo426 on May 30, 2023 5:14:07 GMT -5
Not too bad and you have to install the turret before joining the fuselage halves,which requires some masking.I cut the wings apart to allow for the folding wings
|
|
TJ
Senior Member
June '23 Showcased Model Awarded
Member since: May 2023
Posts: 2,165
May 14, 2023 18:18:36 GMT -5
May 14, 2023 18:18:36 GMT -5
|
Post by TJ on May 30, 2023 5:14:12 GMT -5
Another oldie that came out looking great
|
|
|
|
Post by 406 Silverado on May 30, 2023 5:15:49 GMT -5
Not too bad and you have to install the turret before joining the fuselage halves,which requires some masking. I cut the wings apart to allow for the folding wings I was gonna ask if that was an option in this kit but then I read that bit about cutting the wings.....WOW!! |
|
philo426
Full Member
Member since: May 2023
Posts: 518
May 22, 2023 18:17:33 GMT -5
May 22, 2023 18:17:33 GMT -5
|
Post by philo426 on May 30, 2023 15:44:54 GMT -5
Yes just tape off the wing joints and carefully scribe until the cut is made!
|
|
