|
|
Post by tcoat on Feb 18, 2024 10:34:14 GMT -5
Even though I have a pile on the bench my recent build of the old P-61 put me in the mood for another old Revel kit. I had the most recent boxing of the venerable Apache sitting there since I picked up at a flea market for $% or $6 in 2022 screaming at me so it came to the front of the line.  Since it dates back to the mid 80's it is a mix of very nice detail and some oddly old school engineered parts. No modern kit maker would do this:  Even though the molds are 40 years old and have probably pumped out millions of copies they are still pretty good with only a small amount of flash and no sink marks or short shots that I have found yet.    The glass looks very nice and should mask up easily.  Somebody had rather sloppily started hand painting the cockpits so all the parts came off the sprues so I could airbrush them.  This will be another straight OOB build so should move along pretty quick.  |
|
lyle
Forum Moderator 
Member since: May 2013
On the sunny side of the dirt
Posts: 1,643 
MSC Staff
|
Post by lyle on Feb 18, 2024 11:11:14 GMT -5
|
|
|
|
Post by kyledehart5 on Feb 18, 2024 12:28:14 GMT -5
Excellent. Looking forward to seeing this one come together.
|
|
TJ
Senior Member
June '23 Showcased Model Awarded
Member since: May 2023
Posts: 2,157
May 14, 2023 18:18:36 GMT -5
May 14, 2023 18:18:36 GMT -5
|
Post by TJ on Feb 18, 2024 12:30:19 GMT -5
Ooh a Whirlybird type thingy.
|
|
|
|
Post by Steve Zuleski on Feb 18, 2024 12:45:19 GMT -5
Excellent, T, Ruck On!
|
|
|
|
Post by keavdog on Feb 18, 2024 12:48:14 GMT -5
I built the Monogram boxing back in the 80s  This will be fun to watch. I have the Hasegawa Longbow in the stash. |
|
|
|
Post by tcoat on Feb 18, 2024 13:19:11 GMT -5
I built the Monogram boxing back in the 80s This will be fun to watch. I have the Hasegawa Longbow in the stash. This is a kit from the time I wasn't building so this is my first crack at it. So far it is surprisingly nice. Cockpit all done up. Still needs flat to tone things down.  Another detail from the transition to better detail. Very nice cushion texture that takes a wash beautifully. Then have 4 huge injector posts right through it!  |
|
garybrantley
Full Member
April '24 Showcased Build Awarded
Member since: January 2024
Posts: 386
Jan 22, 2024 12:16:33 GMT -5
Jan 22, 2024 12:16:33 GMT -5
|
Post by garybrantley on Feb 18, 2024 13:40:11 GMT -5
I'll enjoy following along! 👍 My Monogram AH-64 was built in the early '90s and is a model that I've haven't photographed yet. I recall it a good kit to build. I remember holding the main blades over a pot of boiling water in order to get their characteristic sag. 🙂
|
|
|
|
Post by tcoat on Feb 18, 2024 16:18:22 GMT -5
Crew and cockpits ready for flat coat. Don't usually give a crew but I really liked these figures.  |
|
|
|
Post by kyledehart5 on Feb 18, 2024 18:42:33 GMT -5
Sweet!!
|
|
|
|
Post by tcoat on Feb 18, 2024 19:15:37 GMT -5
|
|
|
|
Post by kyledehart5 on Feb 18, 2024 23:14:00 GMT -5
Quick work on the little whirly bird dudes. Nicely done
|
|
handiabled
Administrator 
Apr '23 Showcased Build Awarded
Member since: February 2023
Posts: 4,387
Member is Online
MSC Staff
|
Post by handiabled on Feb 19, 2024 9:46:18 GMT -5
Bookmarked! I love the Apache and yours is looking great so far
|
|
|
|
Post by Medicman71 on Feb 19, 2024 11:32:58 GMT -5
Very nice! You can tell that the molds are old as hell.
|
|
|
|
Post by tcoat on Feb 19, 2024 11:56:49 GMT -5
Very nice! You can tell that the molds are old as hell. It is truly a transitional kit leading between old basic detail and modern high detail. You get parts like the rotor hub assembly which is just a vaguely hub shaped lump of plastic but then there is the chin gun and some of the smaller parts which are very nicely done. They were not quite out of the RIVIT EVERTHING stage though. The molds themselves may be old but most of the parts are still pretty crisp. So far it has gone pretty good other than a major operator error that I will show later. |
|
|
|
Post by tcoat on Feb 20, 2024 7:33:33 GMT -5
Gotta love the targeting helmets of these things!   |
|
|
|
Post by tcoat on Feb 20, 2024 20:04:36 GMT -5
|
|
|
|
Post by keavdog on Feb 20, 2024 20:50:36 GMT -5
Looks like a glob of chewing gum lol
|
|
|
|
Post by tcoat on Feb 21, 2024 8:12:53 GMT -5
Looks like a glob of chewing gum lol It is cleaning up fine but even at it's very best it is only sort of vaguely close to the real thing. Not sure if they changed over the years but this does NOT look like the kit part.  |
|
|
|
Post by Medicman71 on Feb 21, 2024 8:21:06 GMT -5
Man, look how dirty and worn out that rotor head is.
|
|
|
|
Post by tcoat on Feb 21, 2024 8:56:56 GMT -5
Man, look how dirty and worn out that rotor head is. I like the paint on the one in the background. Model it like that and some would say it is far too weathered! |
|
|
|
Post by Medicman71 on Feb 21, 2024 10:28:51 GMT -5
Man, look how dirty and worn out that rotor head is. I like the paint on the one in the background. Model it like that and some would say it is far too weathered! You mean at the tail next to the guys head? That's the primer inside. The panel has been removed there probably for maintenance. |
|
|
|
Post by tcoat on Feb 21, 2024 11:15:13 GMT -5
I like the paint on the one in the background. Model it like that and some would say it is far too weathered! You mean at the tail next to the guys head? That's the primer inside. The panel has been removed there probably for maintenance. Nope. The whole other chopper to the left. |
|
|
|
Post by Medicman71 on Feb 21, 2024 13:47:10 GMT -5
You mean at the tail next to the guys head? That's the primer inside. The panel has been removed there probably for maintenance. Nope. The whole other chopper to the left. Ahh ok. Yeah, that looks really worn out. |
|
|
|
Post by Steve Zuleski on Feb 21, 2024 13:58:54 GMT -5
Looking good TC, Ruck ON!
|
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 4,117
MSC Staff
|
Post by stikpusher on Feb 21, 2024 16:45:51 GMT -5
AH-64A's had this item at the top of the rotor head  The D Apacahes got rid of that item up there so the Longbow radar could be mounted up on top   The Revell kit is an A and has the mast top item, not the Radar set up. |
|
|
|
Post by tcoat on Feb 21, 2024 17:10:55 GMT -5
AH-64A's had this item at the top of the rotor head The D Apacahes got rid of that item up there so the Longbow radar could be mounted up on top The Revell kit is an A and has the mast top item, not the Radar set up. That accounts for the mounting plate but the whole structure is wrong. For example the braces on the main housing are all on angles on the kit and the real thing they run parallel with the blades. Not to mention the 2 inch scale bolt heads holding the cover on. Will be just fine when all made up it just struck me odd that they do so much with everything else and just sort of went "Mehhh close enough" on that. |
|
|
|
Post by tcoat on Feb 23, 2024 20:08:16 GMT -5
That's better   |
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,643
MSC Staff
|
Post by lyle on Feb 23, 2024 20:46:47 GMT -5
Wow! Amazing transformation.
|
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 4,117
MSC Staff
|
Post by stikpusher on Feb 23, 2024 22:28:12 GMT -5
Much much better!!!
|
|
This will be fun to watch.
