fermis
Full Member
Member since: January 2024
Posts: 284
Jan 22, 2024 14:47:56 GMT -5
Jan 22, 2024 14:47:56 GMT -5
|
Post by fermis on Mar 8, 2024 13:57:13 GMT -5
This kit was given to me to build by/for the property owner of my hunting grounds. The kit is decent...lots of parts for various options. I went with the box art and kept things simple. Wheels up, as it will be a ceiling hanger. I didn't have the proper colors, but, hey..."close" counts in horse shoes, hand grenades, and scale modeling!!! I mixed my own "med sea grey" and "azure blue". Decals were terrible...just about every one of them ended up in pieces...many angry words were said. Finished it up in the wee hours this a.m., and it's now in the owners hands! I think the blue backdrop takes a little bit away from the azure-ness of the blue belly. At this point, I was fed up with broken decals, and called it a day...stencils aren't all that important anyway!
|
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 4,113
MSC Staff
Apr 24, 2023 12:51:53 GMT -5
Apr 24, 2023 12:51:53 GMT -5
|
Post by stikpusher on Mar 8, 2024 14:36:46 GMT -5
Very nice work on your ICM Spit Fermis That will be a mighty fine ceiling hanger. Where did you get the seated pilot figure for the cockpit?
|
|
fermis
Full Member
Member since: January 2024
Posts: 284
Jan 22, 2024 14:47:56 GMT -5
Jan 22, 2024 14:47:56 GMT -5
|
Post by fermis on Mar 8, 2024 14:44:25 GMT -5
Very nice work on your ICM Spit Fermis That will be a mighty fine ceiling hanger. Where did you get the seated pilot figure for the cockpit? 'preciate it!!! Pilot from spares box...Tamiya, pretty sure(hands on his thighs...autopilot!)
|
|
|
Post by keavdog on Mar 8, 2024 15:08:47 GMT -5
very nice. Interesting version of the spit both in design and markings. For some nice pilots check out www.pj-production.be/en/
|
|
|
Post by kyledehart5 on Mar 8, 2024 18:07:45 GMT -5
Brilliant work Fermis. That turned out really well!
|
|
TJ
Senior Member
June '23 Showcased Model Awarded
Member since: May 2023
Posts: 2,155
May 14, 2023 18:18:36 GMT -5
May 14, 2023 18:18:36 GMT -5
|
Post by TJ on Mar 8, 2024 18:10:36 GMT -5
Very nice. Always liked the HF wings on the Spitfire
|
|
andreww
Junior Member
Member since: January 2024
In Canada, off and on every month or so sailing around on the East Coast somewhere.
Posts: 80
Jan 19, 2024 17:31:37 GMT -5
Jan 19, 2024 17:31:37 GMT -5
|
Post by andreww on Mar 8, 2024 20:07:35 GMT -5
Absolutely gorgeous build!!!!!
|
|
|
Post by deafpanzer on Mar 12, 2024 7:37:49 GMT -5
Fermis, it really looks great!!! I bet the new owner is very pleased. I haven't built an ICM kit before and I don't have on in my stash cause I am kinda keen at buying one when I am not too familiar but I am tempted to get new tooled A-26 or B-26 new tooled kits since those seem to be the only new ones out there?
|
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 4,113
MSC Staff
Apr 24, 2023 12:51:53 GMT -5
Apr 24, 2023 12:51:53 GMT -5
|
Post by stikpusher on Mar 12, 2024 10:44:07 GMT -5
Fermis, it really looks great!!! I bet the new owner is very pleased. I haven't built an ICM kit before and I don't have on in my stash cause I am kinda keen at buying one when I am not too familiar but I am tempted to get new tooled A-26 or B-26 new tooled kits since those seem to be the only new ones out there? I’ve built three ICM aircraft kits so far, all 1/48 single seat fighters…. This same Spitfire, a Yak-7, and a Mig-3. I’ve really been liking their kits. ICM’s end opening boxes suck, and their decals suck, but the models themselves are quite nice, and usually quite a bargain.
|
|
fermis
Full Member
Member since: January 2024
Posts: 284
Jan 22, 2024 14:47:56 GMT -5
Jan 22, 2024 14:47:56 GMT -5
|
Post by fermis on Mar 12, 2024 11:24:09 GMT -5
Fermis, it really looks great!!! I bet the new owner is very pleased. I haven't built an ICM kit before and I don't have on in my stash cause I am kinda keen at buying one when I am not too familiar but I am tempted to get new tooled A-26 or B-26 new tooled kits since those seem to be the only new ones out there? I've done a few, and as I recall...they've all been decent kits. Like Stik says though...the decals suck! End opening boxes from any company are annoying (only 1 of the 3 I have in the stash is an end opener). I'd just about guarantee(sight unseen) their 26's would be better than anything else out there.
|
|
stuart
Full Member
Member since: February 2024
Easily confused...
Posts: 230
Member is Online
Feb 24, 2024 6:01:22 GMT -5
Feb 24, 2024 6:01:22 GMT -5
|
Post by stuart on Mar 12, 2024 12:01:06 GMT -5
Very nice work Fermis! I'd say your colour matches are pretty damn close!
|
|
jeaton01
Full Member
Sept '23 Showcased Model Awarded
Member since: October 2013
Posts: 1,267
Oct 3, 2013 22:10:29 GMT -5
Oct 3, 2013 22:10:29 GMT -5
|
Post by jeaton01 on Mar 12, 2024 12:01:48 GMT -5
Well done, and I applaud the git'er done-ness of it!
|
|