lyle
Forum Moderator 
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231 
MSC Staff
|
Post by lyle on Apr 22, 2024 9:30:13 GMT -5
Dong this for a group build over on SPAM....I set the Kenworth aside for a bit. Needed a break from it. This little feller is on the bench of chaos.  I needed something with easier to follow instructions.   And, I've gotten a little bit done.   I like how the springs turned out. Steel with brown wash, but I know that they will need to be repainted after the hull is painted...unless I can get some tape on them. |
|
moparmadness
Full Member
Member since: May 2023
Posts: 845
May 11, 2023 20:39:35 GMT -5
May 11, 2023 20:39:35 GMT -5
|
Post by moparmadness on Apr 22, 2024 9:35:45 GMT -5
Tamiya kits are my go-to reset button when I’m getting burned out on a complex build.
|
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 22, 2024 9:52:43 GMT -5
Tamiya kits are my go-to reset button when I’m getting burned out on a complex build. Yeah, sort like a styrene version of a bag of Oreos and a big glass of milk. |
|
|
|
Post by tcoat on Apr 22, 2024 9:53:32 GMT -5
Tamiya kits are my go-to reset button when I’m getting burned out on a complex build. Yep. I will be needing one soon. Will see how this build goes as it may be a nice change of pace. |
|
|
|
Post by Tobi on Apr 22, 2024 11:56:51 GMT -5
Tamiya kits are my go-to reset button when I’m getting burned out on a complex build. Yeah, sort like a styrene version of a bag of Oreos and a big glass of milk. Sort of "storeoids" for the tormented modeler, then. |
|
|
|
Post by deafpanzer on Apr 22, 2024 12:00:21 GMT -5
You are off to a good start! You will have too much fun painting the camo on it.
|
|
floki
Full Member
Member since: September 2023
Posts: 198
Sept 16, 2023 0:58:27 GMT -5
Sept 16, 2023 0:58:27 GMT -5
|
Post by floki on Apr 22, 2024 16:22:26 GMT -5
Looking good Lyle, for its age it's still a excellent kit
|
|
|
|
Post by kyledehart5 on Apr 22, 2024 18:34:14 GMT -5
Nice start here Lyle!!
|
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 22, 2024 18:50:17 GMT -5
Clint and Kyle, thank you.
|
|
stikpusher
Forum Moderator
Member since: April 2023
Living The Dream
Posts: 3,464
MSC Staff
|
Post by stikpusher on Apr 22, 2024 22:06:26 GMT -5
Oh damn... Lyle has armor AMS... replacing the molded on springs...  |
|
|
|
Post by tcoat on Apr 23, 2024 6:43:22 GMT -5
Oh damn... Lyle has armor AMS... replacing the molded on springs... Those springs are separate pieces. We haven't lost him to the dark side just yet.  |
|
handiabled
Community Relations Moderator 
Member since: February 2023
Posts: 2,495
MSC Staff
|
Post by handiabled on Apr 23, 2024 8:22:14 GMT -5
Good idea going to a Tamiya after the AMT nightmare you were in. I'll be following
|
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 23, 2024 8:29:09 GMT -5
Oh damn... Lyle has armor AMS... replacing the molded on springs... Those springs are separate pieces. We haven't lost him to the dark side just yet. Yes, the springs are separate…but have to be glued on early. Some of the art and schemes suggestbtheybwere painted the hull colors. |
|
|
|
Post by Tojo72 on Apr 23, 2024 10:06:40 GMT -5
That should be a nice pallette cleanser
|
|
|
|
Post by tcoat on Apr 23, 2024 10:20:46 GMT -5
Those springs are separate pieces. We haven't lost him to the dark side just yet. Yes, the springs are separate…but have to be glued on early. Some of the art and schemes suggestbtheybwere painted the hull colors. I would guess that most were painted the hull colour. Unpainted spring steel in the South Pacific would not stand up well for long. |
|
stikpusher
Forum Moderator
Member since: April 2023
Living The Dream
Posts: 3,464
MSC Staff
|
Post by stikpusher on Apr 23, 2024 12:14:23 GMT -5
Oh damn... Lyle has armor AMS... replacing the molded on springs... Those springs are separate pieces. We haven't lost him to the dark side just yet. Oh those are the kit parts painted in steel… not actual metal springs rep,acing the kit parts. And here I was getting excited for him! I remember that the kit springs are not molded onto the hull. I’ve built a few of these… |
|
Real G
Full Member
Member since: April 2023
Posts: 609
|
Post by Real G on Apr 23, 2024 12:45:35 GMT -5
|
|
|
|
Post by robbo on Apr 23, 2024 12:49:56 GMT -5
Never done any Japanese armour and I do like their camo so watch this space
|
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 23, 2024 15:52:43 GMT -5
Never done any Japanese armour and I do like their camo so watch this space No have I! Thanks… |
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 23, 2024 15:57:10 GMT -5
The Dark Side implores you to use aftermarket tracks. For only when you turn to the Dark Side will your tracks have a natural sag. You know you want it. I can feel[ There is some truth to this, but the cost prohibits. The bulldozer and the WW 1 tank came with individual links. |
|
stikpusher
Forum Moderator
Member since: April 2023
Living The Dream
Posts: 3,464
MSC Staff
|
Post by stikpusher on Apr 23, 2024 18:39:16 GMT -5
The Dark Side implores you to use aftermarket tracks. For only when you turn to the Dark Side will your tracks have a natural sag. You know you want it. I can feel[ There is some truth to this, but the cost prohibits. The bulldozer and the WW 1 tank came with individual links. Well this is a much older kit... from 1975 or so if I remember right. Long before indy link tracks came along... I don't remember seeing any link and length tracks until the Tmaiya Sdkfz.250/3 Greif kit came out a few years later... |
|
Real G
Full Member
Member since: April 2023
Posts: 609
|
Post by Real G on Apr 26, 2024 13:50:14 GMT -5
There is some truth to this, but the cost prohibits. The bulldozer and the WW 1 tank came with individual links. Well this is a much older kit... from 1975 or so if I remember right. Long before indy link tracks came along... I don't remember seeing any link and length tracks until the Tmaiya Sdkfz.250/3 Greif kit came out a few years later... Yeah, there is much to like about link and length tracks. The only real advantage indy tracks have over L&L is that the end connectors usually have better definition. Still, the Modelkasten tracks I posted were easy to clean up and build. I do worry about solvent based washes damaging the delicate connector pins. |
|
floki
Full Member
Member since: September 2023
Posts: 198
Sept 16, 2023 0:58:27 GMT -5
Sept 16, 2023 0:58:27 GMT -5
|
Post by floki on Apr 26, 2024 19:33:27 GMT -5
I 3d printed a set of workable tracks for mine. I had mine in a diorama knocked out with the tracks broken and sagged over the return rollers. Probably really hard to do that with the old rubberbands
|
|
|
|
Post by 406 Silverado on Apr 27, 2024 9:50:16 GMT -5
This is indeed looking good so far Lyle! Ya gotta love Real G's response about the AM tracks for the proper sag. Frickin' cracks me up. lolololol.
Go for it Lyle!!
|
|
lyle
Forum Moderator
Member since: May 2013
On the sunny side of the dirt
Posts: 1,231
MSC Staff
|
Post by lyle on Apr 27, 2024 13:30:51 GMT -5
This is indeed looking good so far Lyle! Ya gotta love Real G's response about the AM tracks for the proper sag. Frickin' cracks me up. lolololol. Go for it Lyle!! Joe, I already have enough sag! |
|
