Post by outerlimtz on Jul 8, 2024 22:41:19 GMT -5
I bought this van at the same time I bought the Plymouth coupe and the Chevy wagon. All I wanted from this kit was the vending machine, but figured the build would be just more practice. Still haven't gotten the vending machine together.
I had no idea what I wanted to do with this thing. I didn't want a Coke vehicle, at least not right now. I scoured the Google for days, looking for ideas, but all good vans came down to custom graphics. Didn't matter if it was in the 70's or 80's, the graphics is what made these.
I did get an idea of creating a tribute to Ozzy. A groupie following him around from city to city on his US trip of the Ultimate Sin tour.I even started testing graphics, but they just wouldn't turn out. Just as they didn't on this final build.
After about a week and a half, I finally decided what I was going to do. Though I have a can of yellow paint, I wanted to airbrush this. I have the black that I used on the Nova wagon, and I like that paint. So I went to HL and picked up a bottle of the Createx Opaque Yellow. Guess it wasn't just on the Nova that the black laid thin, even with 3-4 coats. The black, over gray primer scratched so easy, that there was a lot of touch ups to be done before finishing.
The kit itself was relatively easy to build. The hardest part about it all, was masking off the dog house on the interior. This time around, I assembled as much as I could of the chassis and suspension that was going to be all black. Primed it as one piece and painted it as one.
All in all, there are paint mistakes due to masking. Still haven't gotten the hang of it. I really wasn't keen on the yellow and black paint as I was the Createx green I used on the bonneville. And it seems i'm going through too much thinner and paint trying to get the proper mixes. But i have found that a 1-1 mix at 35-40 PSI works with just about all of the Createx paints.
Doing my own decals is still a struggle. Though everything was done at 1200 DPI, they splotch when printing. I did order a set for the green 37 Ford and a race kit I will be doing, but I don't want to have to keep forking over money for decals if I can do my own, so it's a process I need to iron out. Regardless, at a distance, this looks good. Up close, i've done better. I used the Tamiya Gloss Clear on this instead of the Createx. I like the sheen of the Tamiya better. Running out of that too, as it's a 1-1 mix and takes a lot for multiple coats. On the bright side, it's cheaper than the Createx. But I know I can mix the two without any drastic issues.
Custom decals on an HP inkjet do not work!
I had no idea what I wanted to do with this thing. I didn't want a Coke vehicle, at least not right now. I scoured the Google for days, looking for ideas, but all good vans came down to custom graphics. Didn't matter if it was in the 70's or 80's, the graphics is what made these.
I did get an idea of creating a tribute to Ozzy. A groupie following him around from city to city on his US trip of the Ultimate Sin tour.I even started testing graphics, but they just wouldn't turn out. Just as they didn't on this final build.
After about a week and a half, I finally decided what I was going to do. Though I have a can of yellow paint, I wanted to airbrush this. I have the black that I used on the Nova wagon, and I like that paint. So I went to HL and picked up a bottle of the Createx Opaque Yellow. Guess it wasn't just on the Nova that the black laid thin, even with 3-4 coats. The black, over gray primer scratched so easy, that there was a lot of touch ups to be done before finishing.
The kit itself was relatively easy to build. The hardest part about it all, was masking off the dog house on the interior. This time around, I assembled as much as I could of the chassis and suspension that was going to be all black. Primed it as one piece and painted it as one.
All in all, there are paint mistakes due to masking. Still haven't gotten the hang of it. I really wasn't keen on the yellow and black paint as I was the Createx green I used on the bonneville. And it seems i'm going through too much thinner and paint trying to get the proper mixes. But i have found that a 1-1 mix at 35-40 PSI works with just about all of the Createx paints.
Doing my own decals is still a struggle. Though everything was done at 1200 DPI, they splotch when printing. I did order a set for the green 37 Ford and a race kit I will be doing, but I don't want to have to keep forking over money for decals if I can do my own, so it's a process I need to iron out. Regardless, at a distance, this looks good. Up close, i've done better. I used the Tamiya Gloss Clear on this instead of the Createx. I like the sheen of the Tamiya better. Running out of that too, as it's a 1-1 mix and takes a lot for multiple coats. On the bright side, it's cheaper than the Createx. But I know I can mix the two without any drastic issues.
Custom decals on an HP inkjet do not work!
