castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Jul 10, 2024 22:57:06 GMT -5
So far it looks like this...
Eventually, will look something like this |
|
Mike
Full Member
Member since: December 2023
Posts: 293
Dec 28, 2023 0:41:00 GMT -5
Dec 28, 2023 0:41:00 GMT -5
|
Post by Mike on Jul 10, 2024 23:25:50 GMT -5
This looks fun. I'll be watching with interest.
|
|
|
|
Post by kyledehart5 on Jul 11, 2024 0:30:02 GMT -5
I’ll be watching as well!
|
|
|
|
Post by 406 Silverado on Jul 11, 2024 4:55:43 GMT -5
You can count me in as well. I don't think I've ever seen that before.
|
|
handiabled
Administrator 
Member since: February 2023
Posts: 3,681 
MSC Staff
|
Post by handiabled on Jul 11, 2024 8:01:31 GMT -5
I'm on board for this build!
|
|
|
|
Post by Steve Zuleski on Jul 11, 2024 12:36:39 GMT -5
Ruck On, I say!
|
|
|
|
Post by deafpanzer on Jul 13, 2024 7:28:38 GMT -5
SWEET! I always thought this is one of most coolest looking halftrack!
|
|
stikpusher
Forum Moderator 
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 3,936
MSC Staff
|
Post by stikpusher on Jul 13, 2024 21:07:46 GMT -5
An armed and armored mule deer… such a cool subject!
|
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Jul 27, 2024 23:15:05 GMT -5
|
|
handiabled
Administrator
Member since: February 2023
Posts: 3,681
MSC Staff
|
Post by handiabled on Jul 28, 2024 2:40:24 GMT -5
Great looking progress on this. I like the weathered launch tubes
|
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Aug 3, 2024 17:17:33 GMT -5
Getting there...it comes with vinyl tracks and individual link tracks. Of course, the masochist in me chose the later... |
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 3,936
MSC Staff
|
Post by stikpusher on Aug 3, 2024 23:36:27 GMT -5
If it's not too late, I don't believe that the rounds should be protruding from their launch tubes like that... at most maybe slightly...
|
|
handiabled
Administrator
Member since: February 2023
Posts: 3,681
MSC Staff
|
Post by handiabled on Aug 4, 2024 3:41:11 GMT -5
I meant to ask previously but what paint are you using on the exterior?
|
|
|
|
Post by 406 Silverado on Aug 4, 2024 7:47:31 GMT -5
I'm liking what you're doing with the interior already Castel. What did you do to acheive the whitewashed look in there?
|
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Aug 4, 2024 14:49:52 GMT -5
Well...it is too late  . The instructions say the rockets should protrude 7mm so that is what I did. But I do agree, now that you mentioned. |
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Aug 4, 2024 14:53:05 GMT -5
Exterior is Tamiya's dark yellow. Then I mixed some ground black chalk with water, added a drop of dish soap, mixed it up to create some sludge. Add some more water or dip the brush into the sludge and then into water to dilute it. Either way, if it is too black its easy to remove with clean wet brush or paper towel.
|
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Aug 4, 2024 14:57:32 GMT -5
I'm liking what you're doing with the interior already Castel. What did you do to acheive the whitewashed look in there? Its a bit of a mess...I had some Tamiya's gloss white and the LHS is closed at the moment so i didn't go to buy flat white. So I mixed Tamiya's light grey with the gloss white in an attempt to reduce the glossiness, then used a bit of drybrushing and sponge for chipping using metallic grey and covered it all with the above described sludge. |
|
|
|
Post by 406 Silverado on Aug 4, 2024 15:50:10 GMT -5
I'm liking what you're doing with the interior already Castel. What did you do to acheive the whitewashed look in there? Its a bit of a mess...I had some Tamiya's gloss white and the LHS is closed at the moment so i didn't go to buy flat white. So I mixed Tamiya's light grey with the gloss white in an attempt to reduce the glossiness, then used a bit of drybrushing and sponge for chipping using metallic grey and covered it all with the above described sludge. Looks like that homemade concoction did the trick.  |
|
stikpusher
Forum Moderator
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 3,936
MSC Staff
|
Post by stikpusher on Aug 4, 2024 16:33:49 GMT -5
Well...it is too late . The instructions say the rockets should protrude 7mm so that is what I did. But I do agree, now that you mentioned. I had to look it up... it's the tails of the rockets that protrude from the launch tubes...  |
|
castelnuovo
Full Member
Member since: July 2023
From the "wet coast"
Posts: 186
Jul 16, 2023 0:17:51 GMT -5
Jul 16, 2023 0:17:51 GMT -5
|
Post by castelnuovo on Aug 4, 2024 22:29:02 GMT -5
Awwwww, f@#$%. I am getting dyslexic.  . But managed to dig 'em all out with gusto  |
|
. The instructions say the rockets should protrude 7mm so that is what I did. But I do agree, now that you mentioned. 