craigcole20b
Full Member
Member since: June 2012
Posts: 397
Jun 8, 2012 22:26:16 GMT -5
Jun 8, 2012 22:26:16 GMT -5
|
Post by craigcole20b on Sept 9, 2012 13:40:04 GMT -5
hi everyone i have a question about the rubber tires and rims for the ATGM STRYKER that iam going to be priming and painting soon.
should i mount the rims first and glue in place and prime and paint then mount the rubber wheels after the fact?
|
|
|
Post by spud on Sept 9, 2012 14:11:46 GMT -5
yep. push the rim into the tire once done push in with the back side of the rim to avoid any damage to the paint
|
|
craigcole20b
Full Member
Member since: June 2012
Posts: 397
Jun 8, 2012 22:26:16 GMT -5
Jun 8, 2012 22:26:16 GMT -5
|
Post by craigcole20b on Sept 9, 2012 17:09:01 GMT -5
sorry what i wanted to say was should i glue the rims in place on the model first then attach the wheels to them or leave them off (sorry iam burned out from working two jobs and working six days a week)
|
|
|
Post by spud on Sept 9, 2012 17:30:38 GMT -5
i would let them off drill a hole at the back and shove a cocktail stick in them to hold. you could break the suspension when you go to put the tire on if you glue them on first
|
|
craigcole20b
Full Member
Member since: June 2012
Posts: 397
Jun 8, 2012 22:26:16 GMT -5
Jun 8, 2012 22:26:16 GMT -5
|
Post by craigcole20b on Sept 10, 2012 17:33:52 GMT -5
thanks for the info guys as you can tell by my post in the other thread i forgot to check my post and primed them all together (hand slapping forehead) good thing i have silly putty
|
|
|
Post by spud on Sept 10, 2012 18:05:57 GMT -5
no harm in that just paint the tire with some Tamiya Rubber black
|
|