Deleted
Member since: January 1970
Posts: 0
May 7, 2024 13:13:43 GMT -5
May 7, 2024 13:13:43 GMT -5
|
Post by Deleted on Dec 11, 2012 10:37:58 GMT -5
Hi Guys; I thought I'd share a few tidbits with the group, as I thought they might be of interest. I have an association with an industrial bit company, yes the same micro-bit sizes that we use in pin-vises, except they aren't of bit stock. I have access to almost any size you might want, and get this; They are ALL on 3/32 - 1/8th shanks. Yes this means with the right collets can be used in Pin-Vise, Dremel, or as I have done a few times so far with my finger tips only. I've made an example set, which is essentially 50 bits, and tried using the X-Acto drill bit stand as my basis. I have a picture set if any one is interested in seeing such. I can be emailed @ midhudipms@aol.com, just let me know from here so I can send you an info packet I also recently finished a recent Club Deal with Alpha-Abrasives; If the powers to be want to try to do a group thing here as well, I can provide you all the info, & contact names / info. Bill
|
|
|
Post by wbill76 on Dec 11, 2012 20:29:37 GMT -5
Sounds cool! I know I'd be helpless without my set of 'finger drills'!
|
|
|
Post by 406 Silverado on Dec 12, 2012 9:01:06 GMT -5
Micro bits are a must in the hobby now a days. I just snapped one of mine the other day. Can you post a pic here of these bit, or email me all the info through MSC. mscforum@scratchmod.com
|
|