|
|
Post by Tojo72 on Oct 10, 2013 9:00:14 GMT -5
I wanted to try out Mr Surfacer 1200 in the can as a primer,I heard it was good,but I can only get the 1000 at my LHS,how is that stuff for priming ?
I currently use the Tamiya stuff in the can
|
|
|
|
Post by Tobi on Oct 10, 2013 11:46:15 GMT -5
Only tried out the 500 last spring. More gritty than Tamiya, takes a little longer to dry and the smell is also as bad.
I think the 1000/1200 are pretty interchangeable with the Tamiya primer, so in the end it's just a matter of faith.
Cheers,
Tobi
|
|
|
|
Post by Tojo72 on Oct 10, 2013 11:53:15 GMT -5
Yes,I only use 500 for filling seams,thanks
|
|
|
|
Post by wing_nut on Oct 10, 2013 13:59:21 GMT -5
I have only used the Mr. S in a jar and thinned for use with the AB but it's a great primer. It's hot(ish) so it gets a good bite into the plastic. If you ever so any bare metal aircraft, for the non-polished and chrome colors it's the best primer.
I cannot get a smooth light coat with a rattle can so I would likely decant the Mr. S to spray through the AB. But that's me.
|
|
