|
|
Post by 406 Silverado on Aug 26, 2014 13:00:21 GMT -5
I just posted a rough video, was actually a test video and will be replaced with a better one. The video is about 10min and is an SBS/How-to on air brushing Vallejo Surface Primer.People are still having problems with the primer and this video should help. www.youtube.com/watch?v=QtkyMSiFcOU |
|
|
|
Post by deafpanzer on Aug 26, 2014 16:33:50 GMT -5
I think I saw it...  Great clip! |
|
|
|
Post by 406 Silverado on Aug 26, 2014 16:43:29 GMT -5
Thanks Andy
|
|
|
|
Post by Leon on Aug 26, 2014 20:10:55 GMT -5
Great video and SBS Rob.  |
|
Gordon Ferguson
Junior Member
Member since: April 2012
Posts: 85
Apr 3, 2012 10:22:22 GMT -5
Apr 3, 2012 10:22:22 GMT -5
|
Post by Gordon Ferguson on Aug 27, 2014 1:15:23 GMT -5
Useful, had got pressure right ........ But had had tip drying issues on the AB, will try thinning as you suggested. ............. Which will also help with the thin coats , I am still a bit heavy handed at times.
|
|
|
|
Post by bbd468 on Sept 3, 2014 12:31:49 GMT -5
Nice job on the vid Rob, left a post and question there.  |
|
Thomas_M/
Full Member
Member since: May 2013
Don´t panic! I am German!
Posts: 217 
|
Post by Thomas_M/ on Sept 14, 2014 3:32:02 GMT -5
Just watching the video. Wonder what airbrush you are using here. Also some of the embedded text information disappears to fast for me to read it. Continuing to watch now! :-)
|
|
Thomas_M/
Full Member
Member since: May 2013
Don´t panic! I am German!
Posts: 217
|
Post by Thomas_M/ on Sept 14, 2014 3:42:01 GMT -5
I once painted a full resin tank model using Vallejo´s primer and it worked great. Shoots good using my H&S Evolution with the 0.4mm nozzle.
The only drawback for me is that these vinyl acrylic whatever primers don´t etch into the plastic. So I in most cases use Alclad´s range of primers just to be on the safe side. Nonetheless those Vallejo primers are useful for me here and there.
|
|
Great clip! 
