|
Post by kyledehart5 on Jun 5, 2024 6:28:48 GMT -5
|
|
|
Post by Leon on Jun 5, 2024 6:37:57 GMT -5
Very nicely done Kyle!
|
|
|
Post by tcoat on Jun 5, 2024 7:17:33 GMT -5
Looks really good! But... I can't hold my tongue on the bright silver shovel and axe! The straps and brackets should be khaki or at least green and a dark wash to knock the brightness of the silver down would go a long ways. May be just the pictures but they stand out far more than they ever would. ![](https://i.pinimg.com/originals/f3/c9/b9/f3c9b938e69713ce6c385cff3d9a7fcc.gif)
|
|
|
Post by kyledehart5 on Jun 5, 2024 7:40:47 GMT -5
Looks really good! But... I can't hold my tongue on the bright silver shovel and axe! The straps and brackets should be khaki or at least green and a dark wash to knock the brightness of the silver down would go a long ways. May be just the pictures but they stand out far more than they ever would. ![](https://i.pinimg.com/originals/f3/c9/b9/f3c9b938e69713ce6c385cff3d9a7fcc.gif) They’re pretty dull metal in person. But I get what you’re saying. Just wasn’t quite sure what to do with them as I say them in green, metallic, black. All different. Just chose to go with a flat iron look. Maybe I should’ve went more burnt iron or darkened it up a bit more. I don’t know.
|
|
|
Post by kyledehart5 on Jun 5, 2024 7:41:10 GMT -5
|
|
|
Post by tcoat on Jun 5, 2024 7:56:29 GMT -5
Looks really good! But... I can't hold my tongue on the bright silver shovel and axe! The straps and brackets should be khaki or at least green and a dark wash to knock the brightness of the silver down would go a long ways. May be just the pictures but they stand out far more than they ever would. They’re pretty dull metal in person. But I get what you’re saying. Just wasn’t quite sure what to do with them as I say them in green, metallic, black. All different. Just chose to go with a flat iron look. Maybe I should’ve went more burnt iron or darkened it up a bit more. I don’t know. For military stuff the rule of thumb is "When in doubt paint it green". Can't go too far wrong. It could very well just be a trick of photography. I struggle with that all the time.
|
|
keavdog
Senior Member
![*](//storage.proboards.com/forum/images/stars/star_magenta.png) ![*](//storage.proboards.com/forum/images/stars/star_magenta.png) ![*](//storage.proboards.com/forum/images/stars/star_magenta.png)
Member since: April 2023
OPEN WHEEL GROUP BUILD MODERATOR
Posts: 2,129
Member is Online
Apr 2, 2023 21:25:25 GMT -5
Apr 2, 2023 21:25:25 GMT -5
|
Post by keavdog on Jun 5, 2024 8:01:35 GMT -5
Nicely done Kyle. Would look so good on a dio with a 1/35 h-13 and some figures!
|
|
|
Post by tcoat on Jun 5, 2024 8:22:38 GMT -5
|
|
handiabled
Administrator ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png) ![*](//storage.proboards.com/forum/images/stars/star_orange.png)
Member since: February 2023
Posts: 3,681
MSC Staff
Feb 7, 2023 9:33:32 GMT -5
Feb 7, 2023 9:33:32 GMT -5
|
Post by handiabled on Jun 5, 2024 8:59:19 GMT -5
Turned out great Kyle!!
|
|
|
Post by kyledehart5 on Jun 5, 2024 17:40:47 GMT -5
They’re pretty dull metal in person. But I get what you’re saying. Just wasn’t quite sure what to do with them as I say them in green, metallic, black. All different. Just chose to go with a flat iron look. Maybe I should’ve went more burnt iron or darkened it up a bit more. I don’t know. For military stuff the rule of thumb is "When in doubt paint it green". Can't go too far wrong. It could very well just be a trick of photography. I struggle with that all the time. If I do some more work to it like a base or something I may just paint them green. But they’re really not all that shiny I promise. 😂 Nicely done Kyle. Would look so good on a dio with a 1/35 h-13 and some figures! Man I’d love to do that. Don’t mind me singing the theme song the rest of the day So cool Tony!! Thank you so much!
|
|
floki
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Member since: September 2023
Posts: 284
Sept 16, 2023 0:58:27 GMT -5
Sept 16, 2023 0:58:27 GMT -5
|
Post by floki on Jun 6, 2024 2:04:28 GMT -5
For your first 1/35 adventure it turned out very well!
|
|
Golikell
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
Member since: January 2024
Posts: 205
Jan 17, 2024 4:28:06 GMT -5
Jan 17, 2024 4:28:06 GMT -5
|
Post by Golikell on Jun 6, 2024 4:54:38 GMT -5
I've been also doing some research on the various tools on US vehicles and their colors... Steve Zaloga on the missing lynxs forum stated the following: All tools were supposed to be painted in olive drab like the rest of the vehicle. However, due to the pressures of wartime production, this was not always the case. Three color options were the most common: overall oilve drab, overall black, and original commercial finish (wood + bare metal or black painted metal). www.tapatalk.com/groups/missinglynx/painting-pioneer-tools-on-u-s-equipment-t68085.html
|
|
|
Post by BattleScale Collectica Show on Jun 6, 2024 5:12:07 GMT -5
Looks good Kyle.
|
|
stikpusher
Forum Moderator ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png) ![*](//storage.proboards.com/forum/images/stars/star_blue.png)
May '23 Showcased Model Awarded
Member since: April 2023
Living The Dream
Posts: 3,936
MSC Staff
Apr 24, 2023 12:51:53 GMT -5
Apr 24, 2023 12:51:53 GMT -5
|
Post by stikpusher on Jun 6, 2024 14:09:53 GMT -5
I've been also doing some research on the various tools on US vehicles and their colors... Steve Zaloga on the missing lynxs forum stated the following: All tools were supposed to be painted in olive drab like the rest of the vehicle. However, due to the pressures of wartime production, this was not always the case. Three color options were the most common: overall oilve drab, overall black, and original commercial finish (wood + bare metal or black painted metal). www.tapatalk.com/groups/missinglynx/painting-pioneer-tools-on-u-s-equipment-t68085.htmlWhich is about the same as today's US Army. If it didn't come in standard GI OD or later Forest Green then CARC Green, the tools looked like any of the same type you could get at Sears or hardware store in varnished wood and painted metal. After every field use, vehicle crews are given cans of green and black paint to repaint them after cleaning, and also prior to inspections.
|
|
|
Post by kyledehart5 on Jun 7, 2024 2:38:48 GMT -5
For your first 1/35 adventure it turned out very well! Thanks! There will be more. Thank you!!!
|
|
dean48ws
Full Member
![*](//storage.proboards.com/forum/images/stars/star_lightblue.png) ![*](//storage.proboards.com/forum/images/stars/star_lightblue.png)
July '24 Showcased Model Awarded
Member since: October 2023
Posts: 312
Oct 21, 2023 14:37:54 GMT -5
Oct 21, 2023 14:37:54 GMT -5
|
Post by dean48ws on Jun 7, 2024 2:57:33 GMT -5
Looks great Kyle. I hear what the guys are saying about the shovel, but it wouldn't take long to wear the paint off it. I'd say there is a fair chance that it had the edge ground sharp to make the digging easier - cause we all do that to the digging tools, don't we??
|
|
|
Post by kyledehart5 on Jun 7, 2024 3:05:06 GMT -5
Looks great Kyle. I hear what the guys are saying about the shovel, but it wouldn't take long to wear the paint off it. I'd say there is a fair chance that it had the edge ground sharp to make the digging easier - cause we all do that to the digging tools, don't we?? Thank you!! Still may just paint over them with OD Green even though they certainly photographed brighter than they are. Anyways, no one is going to see the model so no big deal.
|
|
|
Post by tcoat on Jun 7, 2024 5:48:19 GMT -5
Looks great Kyle. I hear what the guys are saying about the shovel, but it wouldn't take long to wear the paint off it. I'd say there is a fair chance that it had the edge ground sharp to make the digging easier - cause we all do that to the digging tools, don't we?? Yep they would wear but mostly around the edges and not uniform over the shovel blade, handle and axe head. Shiny worn edges on shovel ![](https://i.postimg.cc/hjMtjhzw/Platform1.jpg) Looks great Kyle. I hear what the guys are saying about the shovel, but it wouldn't take long to wear the paint off it. I'd say there is a fair chance that it had the edge ground sharp to make the digging easier - cause we all do that to the digging tools, don't we?? Thank you!! Still may just paint over them with OD Green even though they certainly photographed brighter than they are. Anyways, no one is going to see the model so no big deal. SORRY! Didn't mean to cause such a stir on something as basic as some tools!!! ![](https://y.yarn.co/3ecf048d-3a14-4552-827d-f3fe69c0761f_text.gif)
|
|
|
Post by kyledehart5 on Jun 8, 2024 4:35:33 GMT -5
Looks great Kyle. I hear what the guys are saying about the shovel, but it wouldn't take long to wear the paint off it. I'd say there is a fair chance that it had the edge ground sharp to make the digging easier - cause we all do that to the digging tools, don't we?? Yep they would wear but mostly around the edges and not uniform over the shovel blade, handle and axe head. Shiny worn edges on shovel ![](https://i.postimg.cc/hjMtjhzw/Platform1.jpg) Thank you!! Still may just paint over them with OD Green even though they certainly photographed brighter than they are. Anyways, no one is going to see the model so no big deal. SORRY! Didn't mean to cause such a stir on something as basic as some tools!!! ![](https://y.yarn.co/3ecf048d-3a14-4552-827d-f3fe69c0761f_text.gif) No worries at all. I generally have no idea of what I'm doing or why. Your shovel looks awesome, by the way.
|
|