|
|
Post by robbo on Sept 23, 2013 5:24:00 GMT -5
Oh this is gonna look right nice mate  |
|
|
|
Post by robbo on Sept 23, 2013 5:24:20 GMT -5
Oh this is gonna look right nice mate |
|
|
|
Post by robbo on Sept 23, 2013 5:24:47 GMT -5
double tap eh ?
|
|
|
|
Post by Deano on Sept 23, 2013 7:30:38 GMT -5
Yeah I see where ya goin , Nice one Todd  Deano |
|
|
|
Post by TRM on Sept 23, 2013 8:46:34 GMT -5
Ian - Just making sure the post took is all!! Thanks M8!! Deano - Thanks!! Slighly "layered approach" coming!! |
|
Paul P.
Senior Member
May 2012 MoM Winner
Member since: November 2011
Posts: 1,686
Nov 15, 2011 17:14:40 GMT -5
Nov 15, 2011 17:14:40 GMT -5
|
Post by Paul P. on Sept 23, 2013 12:08:28 GMT -5
Nothing wrong with layers T, looking the business mate
Paul
|
|
|
|
Post by `Boots` on Sept 23, 2013 12:16:00 GMT -5
Fantastic work buddy......this is the part where i have to pay close attention and scribble down notes  , i like where ya heading and maybe someday i can follow .....terrific stuff pal and keep her lit  |
|
|
|
Post by deafpanzer on Sept 23, 2013 12:18:01 GMT -5
Weathering at AK booth at the show? Only if Rob lets you...
|
|
|
|
Post by TRM on Sept 23, 2013 12:35:22 GMT -5
Thanks Paul...I be in the "final push" now!! Thanks Boots!! If I miss something, just let me know berotha'!! After the PzIII You should be riding shotgun!! LOL...All good Andy!! If we are anywhere nears where we were last year there will be standing room only...Left to Right in a horseshoe...Celticwerks, AK, Armor Farm, SMA, MSC flanked by many others. Usually two deep at the AK and we take turns trying to help out! I would say like liquid gold but more like Crack! .....reminds me I need to write down my list of needs...LOL!!! |
|
Keith Christie
Full Member
Member since: June 2012
Posts: 292 
|
Post by Keith Christie on Sept 23, 2013 14:04:25 GMT -5
Nice job on the primer and shading so far T .
Keith
|
|
|
|
Post by wbill76 on Sept 23, 2013 15:39:38 GMT -5
Very nice start to the paint layering Mr. T! Looking forward to seeing this one come alive even more.
|
|
|
|
Post by Leon on Sept 23, 2013 18:56:46 GMT -5
WOO HOO that is looking mighty fine Todd.Great job on the paint layering. |
|
pantherf..-Email Not Valid
Full Member
Member since: July 2013
"Best Job I've Ever Had"
Posts: 1,253
|
Post by pantherf..-Email Not Valid on Sept 23, 2013 19:16:02 GMT -5
Yeah... it's lookin' HAWT now, I tell you!  Now let's see more!  Jeff |
|
dylan
Full Member
Member since: September 2013
Posts: 152
|
Post by dylan on Sept 23, 2013 20:46:06 GMT -5
I have been following here and on armorama. I think mine is up next, I am definitely using this thread as a guide
cheers
Dylan
|
|
bigjohn
Reviews member 
Member since: December 2011
John Hale
Posts: 3,438
Dec 21, 2011 2:17:45 GMT -5
Dec 21, 2011 2:17:45 GMT -5
|
Post by bigjohn on Sept 23, 2013 22:06:25 GMT -5
PAINT!!!!
|
|
|
|
Post by bullardino on Sept 24, 2013 8:22:40 GMT -5
Nice start on the shading.
|
|
panzerconor.
Full Member
Member since: April 2013
My cat's breath smells like cat food.
Posts: 176
|
Post by panzerconor. on Sept 24, 2013 10:01:59 GMT -5
Paints! Shading! Cool stuff. Hope you're able to bring it this weekend.
|
|
|
|
Post by bbd468 on Sept 24, 2013 10:06:46 GMT -5
Somebody say paint?  Heck i dont see nuting! Were do che go! |
|
|
|
Post by TRM on Oct 6, 2013 19:32:04 GMT -5
My apologies fellas...I seemed to have missed the post over the last week or so!! The show last weekend took up more time than I figured and then I have been playing catch up on some things!! So with that....thanks!! Most appreciated that you hang in there like you have!!! ....FINALLY I a might be getting back into the swing of things!! The past two weeks were a blur with the ArmorCon Show and then a nice head cold to throw things off. I managed to at least get back into the saddle again... Firing up the AB I laid down some base yellow on the lower end. As you may have guessed I will go after some chipping with some CAT yellow variants mixed in.  A little bright at the moment...but it won't be left this way for long!!! Next on the block was going after some of the upper cab section. I decided to use AK's 4BO shading for starters!  Then digging into AK's Afghanistan Set the German Beige Grey is a nice step in the right direction....  I unfortunately spent the past four days working withe the web stuff as well as trying to move two other projects along. The gap between them is closing so I should hopefully be able to step this up a bit this week! As always...thanks for stopping by!!! |
|
Deleted
Member since: January 1970
Posts: 0
Dec 2, 2024 7:46:25 GMT -5
Dec 2, 2024 7:46:25 GMT -5
|
Post by Deleted on Oct 6, 2013 19:35:24 GMT -5
Nice pick. This is a blast to watch!
|
|
|
|
Post by TRM on Oct 6, 2013 19:39:01 GMT -5
Thanks a bunch Bruce!! LOL...I updated the same over on SMA and seen you dropped a note there last week...looks like I have been busy, sorry bout that!! LOL!! Would it help that they had site issue the past few days and I couldn't log on? Yeah I know...excuses!! Thanks again my friend!!! |
|
|
|
Post by wbill76 on Oct 6, 2013 19:46:42 GMT -5
Nice to see more paint progress on this one T! Get to it when you can, we know it will be good! |
|
|
|
Post by Leon on Oct 6, 2013 19:47:20 GMT -5
Todd,great to see the AB fired up .Your colorization is looking really good. |
|
|
|
Post by imatanker on Oct 6, 2013 19:55:46 GMT -5
This is looing more and more like a DUKW build T. Just kidding Bud. Looks Catalicious. Glad you're back at it |
|
panzerconor.
Full Member
Member since: April 2013
My cat's breath smells like cat food.
Posts: 176
|
Post by panzerconor. on Oct 6, 2013 20:38:39 GMT -5
It's awesome seeing how the shading works. I've really got to get myself a compressor and a new AB.
Looking forward to the next installment!
|
|
|
|
Post by TRM on Oct 6, 2013 21:20:04 GMT -5
Thanks Bill!! "Slow and Steady" right? Thanks Leon!! It does feel good to paint some!!! Thanks Jeff! LOL...yeah, been fighting that nasty 'Andy Virus' that has been going around!! Thanks Conor!!! When the time is right brotha', you will not be disappointed when you do! |
|
|
|
Post by 406 Silverado on Oct 6, 2013 21:40:45 GMT -5
Good to see you finally got this one to the spray booth dude. looking sweet so far. Once the paint is on the fun starts.
|
|
|
|
Post by TRM on Oct 6, 2013 21:45:49 GMT -5
Thanks Boss! I still have to re-assemble this thing too!! LOL!! No rushing in modelling ....right?
|
|
Keith Christie
Full Member
Member since: June 2012
Posts: 292
|
Post by Keith Christie on Oct 7, 2013 4:09:08 GMT -5
Really nice start on the paint work T
It's good to see other people's methods for achieving a quality look and finish.
Best Regards
Keith
|
|
paulh.
Senior Member
Member since: November 2011
build, fail, learn, succeed - ENJOY
Posts: 2,389
Nov 15, 2011 15:54:51 GMT -5
Nov 15, 2011 15:54:51 GMT -5
|
Post by paulh. on Oct 7, 2013 4:51:40 GMT -5
I Hi T-, a belated happy birthday btw.
I've fallen a bit behind with this one but catching up now!
Nice porgeres.
P
|
|
, i like where ya heading and maybe someday i can follow 
Heck i dont see nuting! Were do che go! 
