doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 1, 2013 18:46:52 GMT -5
Because I don't have enough projects going on...  I've had a bug to do this one for a while now. Finally diving in. The kit seat is pretty bad. Eduard to the rescue!  Also added some details to the cockpit - mix of Eduard and lead wiring - and drilled out the 20mm Ho-5 cannons.   Next...painted all the cockpit elements up with Alclad Duraluminum. I'll be using this as a base for a chipped and weathered cockpit.  |
|
|
|
Post by deafpanzer on Sept 1, 2013 22:46:59 GMT -5
Looking real good with the interior! Like the markings on the box art!
|
|
|
|
Post by 406 Silverado on Sept 2, 2013 8:07:04 GMT -5
wow that is sweet. You have this thing for 1/32 kits eh..
|
|
venom1
Full Member
Member since: October 2012
Posts: 1,369
Oct 10, 2012 2:40:03 GMT -5
Oct 10, 2012 2:40:03 GMT -5
|
Post by venom1 on Sept 2, 2013 9:44:39 GMT -5
Wowzers! Only just started, and it's already full of awesome!!  Cheers, Sam  |
|
danb.
Reviews member 
March 2013 MoM Winner
Member since: November 2011
Posts: 2,808
Nov 17, 2011 9:22:52 GMT -5
Nov 17, 2011 9:22:52 GMT -5
|
Post by danb. on Sept 2, 2013 11:06:44 GMT -5
WOW another great build started from the DOOG MEISTER will be keeping an eye on this 1
Dan B
|
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 2, 2013 13:10:09 GMT -5
Cockpit's almost wrapped up. Still need to sort the instrument panel, the 12.7mm guns, IP hood and a few other small details.     Paints used: Gunze Nakajima Cockpit Green Liquitex Black Ink Vallejo Black, Black Gray, Offwhite Tamiya Flat Red, Flat Yellow, Clear Red, Smoke MM Chrome Silver W&N Raw Umber MIG Old Rust and Europe Dust pigments |
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 2, 2013 13:12:19 GMT -5
wow that is sweet. You have this thing for 1/32 kits eh.. That I do! Actually sold/selling off a massive chunk of my 1/48 stash. Keeping a few gems (Tamiya Jugs and Corsairs, etc), but moving the rest. I just love the presence that 1/32 has. |
|
|
|
Post by 406 Silverado on Sept 2, 2013 14:27:09 GMT -5
ok I quit
|
|
Rick
Full Member
Member since: March 2013
what to build, what to build . . . Ok THAT one!
Posts: 854 
|
Post by Rick on Sept 3, 2013 12:33:36 GMT -5
Cockpit is awesome Doogs. Wear and tear is brilliantly done. Looking forward to more!
Rick
|
|
destrozas.
Full Member
Member since: August 2012
Posts: 240
Aug 28, 2012 8:30:14 GMT -5
Aug 28, 2012 8:30:14 GMT -5
|
Post by destrozas. on Sept 4, 2013 17:38:57 GMT -5
good paint job, amazon cockpit.
|
|
venom1
Full Member
Member since: October 2012
Posts: 1,369
Oct 10, 2012 2:40:03 GMT -5
Oct 10, 2012 2:40:03 GMT -5
|
Post by venom1 on Sept 5, 2013 0:49:50 GMT -5
Great googly-moogly!!  Freakin' awesome dude.  Cheers, Sam |
|
|
|
Post by bullardino on Sept 5, 2013 3:57:52 GMT -5
Nice start, I jump in |
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 5, 2013 11:27:01 GMT -5
Wow, thanks all!
Got the IP mounted last night. Just have to paint/install the back end of the guns and I'll be about ready to close things up.
|
|
|
|
Post by fightnjoe on Sept 5, 2013 18:49:50 GMT -5
she looks so real. your usual high quality sir.
joe
|
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 6, 2013 9:43:18 GMT -5
|
|
|
|
Post by bullardino on Sept 7, 2013 4:53:38 GMT -5
Wow, outstanding job. |
|
Deleted
Member since: January 1970
Posts: 0
Nov 27, 2024 22:38:18 GMT -5
Nov 27, 2024 22:38:18 GMT -5
|
Post by Deleted on Sept 7, 2013 6:18:19 GMT -5
If the Exterior turns out anything like the Interior....... WOW!!
|
|
|
|
Post by Leon on Sept 7, 2013 20:55:58 GMT -5
Awesome work on the pit Doogs.Really looks the biz.  |
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 9, 2013 10:59:41 GMT -5
On to the Homare engine. Hasegawa's done a pretty creditable job here. The backs of the cylinder banks are hollow, but who cares since you can't see them anyway. I actually prefer this approach, since you get wraparound detail and don't have to fuss with gluing front and rear bank halves. The ignition ring is too fine to drill out, but I was able to jab some holes for the wiring to glue into with my trusty old airbrush needle. Paint is as follows: - Cylinders: Alclad Magnesium - Crankcase and main block: Alclad Semi-Matte Aluminum - Ignition ring: Gunze Super Metallic Chrome Silver (I'm in LOVE with this stuff) I'm planning some fairly heavy weathering...just not to that point yet.  |
|
|
|
Post by bullardino on Sept 10, 2013 2:28:23 GMT -5
Great looking engine |
|
|
|
Post by fightnjoe on Sept 12, 2013 18:49:20 GMT -5
looks very good so far. like the idea with the ab needle.
joe
|
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 14, 2013 2:13:59 GMT -5
The Homare wired and weathered. Mostly. Still have some oil stains I want to add.  |
|
|
|
Post by bullardino on Sept 14, 2013 5:27:54 GMT -5
The crank case is much smoother in this one than in the Macchi. Great job on this radial too |
|
pantherf..-Email Not Valid
Full Member
Member since: July 2013
"Best Job I've Ever Had"
Posts: 1,253
|
Post by pantherf..-Email Not Valid on Sept 14, 2013 8:34:52 GMT -5
Wow, another uber detailed work of art! The bar has been set higher again guys. Wow. I see what I have in store for me on that 1/32 B-25 I want. Jeff |
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 14, 2013 10:45:37 GMT -5
Jeff - the HK engines are fantastic. Best radials I've worked with. Though I haven't played with the Tamiya Zero or Corsair...  |
|
doogsatx/
Senior Member
Feb and Sept 2014_ MoM Winner
Member since: November 2012
Posts: 1,642
Nov 14, 2012 21:29:10 GMT -5
Nov 14, 2012 21:29:10 GMT -5
|
Post by doogsatx/ on Sept 17, 2013 10:14:48 GMT -5
Been focused on getting the two 109s off the bench...but now it's back to the Hayate! Mostly little stuff last night...getting the fuselage aft of the cockpit opening painted black (topped with highly thinned Gunze Engine Gray for some fade effect) and the cowl interior and leading edge light box painted in Nakajima Cockpit Green (per kit instructions).   The engine sits rather deep in the cowl, so there should be lots of opportunity for dirtying up the cowl interior with oil spatters and so on. Hopefully tonight we'll be getting the wings and fuselage joined up. |
|
Rick
Full Member
Member since: March 2013
what to build, what to build . . . Ok THAT one!
Posts: 854
|
Post by Rick on Sept 17, 2013 12:08:24 GMT -5
Looking great Doogs. Amazing the difference alclad makes over regular paint. Will keep following along. Phenomenal work sir.
Rick
|
|
Deleted
Member since: January 1970
Posts: 0
Nov 27, 2024 22:38:18 GMT -5
Nov 27, 2024 22:38:18 GMT -5
|
Post by Deleted on Sept 17, 2013 12:12:11 GMT -5
Dunno how I missed this one! The cockpit looks superb , love the etch seat I can see me switching to 1/32 real soon |
|
|
|
Post by bbd468 on Sept 17, 2013 12:27:21 GMT -5
Hiya Doogs, another fine build ya have goin here. Comin along very nice! |
|
|
|
Post by bullardino on Sept 17, 2013 14:43:22 GMT -5
Another masterpiece in progress, Doogs |
|
