|
|
Post by kyledehart5 on Jan 21, 2024 1:35:16 GMT -5
|
|
|
|
Post by Leon on Jan 21, 2024 4:19:20 GMT -5
Off to a good start Kyle!
|
|
handiabled
Community Relations Moderator 
Member since: February 2023
Posts: 3,218 
MSC Staff
|
Post by handiabled on Jan 21, 2024 5:03:57 GMT -5
I'm along for the ride on this one. Bookmarked!
|
|
|
|
Post by 406 Silverado on Jan 21, 2024 7:06:07 GMT -5
These can turn out to be very good builds Kyle. Will be watching....  |
|
|
|
Post by deafpanzer on Jan 21, 2024 9:21:32 GMT -5
Sweet! I used to have that kit but donated to the club for the raffle couple of years ago. You are off to a good start buddy!
|
|
lyle
Forum Moderator 
Member since: May 2013
On the sunny side of the dirt
Posts: 1,497
MSC Staff
|
Post by lyle on Jan 21, 2024 10:02:28 GMT -5
I think I have something like that a-molderin' away on the shelf. Eager to see what can be done with this. . . not that I can, but I like to see it!
|
|
lowlife
Junior Member
Member since: April 2023
Posts: 97
|
Post by lowlife on Jan 21, 2024 10:31:54 GMT -5
Looking good so far, nice colours ! Gonna be a beast when its finished !
|
|
|
|
Post by kyledehart5 on Jan 21, 2024 12:23:06 GMT -5
Off to a good start Kyle! Thank you! I'm along for the ride on this one. Bookmarked! Hopefully it’s a smooth one. Welcome! These can turn out to be very good builds Kyle. Will be watching.... Thanks Joe! I’ll try not to muck it up too bad. Sweet! I used to have that kit but donated to the club for the raffle couple of years ago. You are off to a good start buddy! Thanks Andy!! In someone else’s hands is probably a good spot for this kit but I enjoy the kits like this. Should be able to get a decent result. I think I have something like that a-molderin' away on the shelf. Eager to see what can be done with this. . . not that I can, but I like to see it! Not sure that I can either Lyle but welcome to the show! 🤣 Looking good so far, nice colours ! Gonna be a beast when it’s finished ! Thank you very much! |
|
Joe Rix
Forum Moderator
Member since: January 2023
Posts: 1,519
MSC Staff
|
Post by Joe Rix on Jan 21, 2024 12:29:49 GMT -5
This should be a fun build to watch. I'm quite sure that you will do it justice. Looks to be a smart take off so far.
|
|
|
|
Post by kyledehart5 on Jan 21, 2024 12:57:02 GMT -5
This should be a fun build to watch. I'm quite sure that you will do it justice. Looks to be a smart take off so far. Thank you Joe!! |
|
atomicholiday
Full Member
Member since: September 2023
Posts: 411
Sept 4, 2023 8:25:11 GMT -5
Sept 4, 2023 8:25:11 GMT -5
|
Post by atomicholiday on Jan 21, 2024 12:57:20 GMT -5
Kyle you brave soul.😁
I had this one as a kid and couldn’t get it together. Best of luck. I’m confident you’ll turn it into a winner.👍
|
|
|
|
Post by kyledehart5 on Jan 21, 2024 13:02:49 GMT -5
Kyle you brave soul.😁 I had this one as a kid and couldn’t get it together. Best of luck. I’m confident you’ll turn it into a winner.👍 I believe it’s the lack of functional brain cells that really does it. Too many paint fumes at work and at home. 🤣🤣 Thanks for coming by. I really do love these problem kits. Sometimes they turn out and sometimes they don’t. |
|
brandonk
Full Member
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 829
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jan 21, 2024 20:25:34 GMT -5
I built this one in my youth and I'd like to build another. Looking forward to seeing this one.
|
|
|
|
Post by kyledehart5 on Jan 21, 2024 20:49:00 GMT -5
I built this one in my youth and I'd like to build another. Looking forward to seeing this one. Thanks for coming along. I’m just hoping I can get the flip nose to somewhat fit and work…and the windshield…and the headers…and, well you get the point. lol. |
|
Art Laski
New Member
Member since: January 2024
Posts: 19
Jan 19, 2024 12:57:12 GMT -5
Jan 19, 2024 12:57:12 GMT -5
|
Post by Art Laski on Jan 21, 2024 21:41:19 GMT -5
Hey Kyle!
My most recent completion (that I kept for myself, anyway) is also an MPC '57 Corvette Gasser, but with a straight axle front end. It looks like a lot of the molds are the same. I changed a lot of stuff, but the age of the kit definitely presented some challenges for me I wasn't expecting. I won't hijack you're thread, but I'll post it up in a new thread soon so you can check it out at your convenience. I'll be watching yours! I know you'll do a great job.
Art
|
|
|
|
Post by kyledehart5 on Jan 21, 2024 23:43:15 GMT -5
Hey Kyle! My most recent completion (that I kept for myself, anyway) is also an MPC '57 Corvette Gasser, but with a straight axle front end. It looks like a lot of the same molds are the same. I changed a lot of stuff, but the age of the kit definitely presented some challenges for me I wasn't expecting. I won't hijack your thread, but I'll post it up in a new thread soon so you can check it out at your convenience. I'll be watching yours! I know you'll do a great job. Art Hey Art! Glad you’re here. Even though it took a good while for it to penetrate my thick skull. 🤦🏻♂️🤣. I’ve been considering going with a straight front axle myself but may just use the kit parts for this build. Not sure. I am pretty sure the MPC kits are mostly the same as this one. I look forward to seeing yours when you get it posted! |
|
|
|
Post by 406 Silverado on Jan 23, 2024 7:06:01 GMT -5
Hey Kyle! My most recent completion (that I kept for myself, anyway) is also an MPC '57 Corvette Gasser, but with a straight axle front end. It looks like a lot of the same molds are the same. I changed a lot of stuff, but the age of the kit definitely presented some challenges for me I wasn't expecting. I won't hijack your thread, but I'll post it up in a new thread soon so you can check it out at your convenience. I'll be watching yours! I know you'll do a great job. Art Hey Art! Glad you’re here. Even though it took a good while for it to penetrate my thick skull. 🤦🏻♂️🤣. I’ve been considering going with a straight front axle myself but may just use the kit parts for this build. Not sure. I am pretty sure the MPC kits are mostly the same as this one. I look forward to seeing yours when you get it posted! He just put up that thread if you want to check it out Kyle. Hold on to your seat when you look at it. Thing looks GREAT!! |
|
|
|
Post by kyledehart5 on Jan 23, 2024 9:53:15 GMT -5
Hey Art! Glad you’re here. Even though it took a good while for it to penetrate my thick skull. 🤦🏻♂️🤣. I’ve been considering going with a straight front axle myself but may just use the kit parts for this build. Not sure. I am pretty sure the MPC kits are mostly the same as this one. I look forward to seeing yours when you get it posted! He just put up that thread if you want to check it out Kyle. Hold on to your seat when you look at it. Thing looks GREAT!! Thank you for letting me know. I’ll be checking that out. Art is an awesome builder. |
|
moparman18064
Full Member
Member since: January 2024
Posts: 376
Jan 5, 2024 20:28:50 GMT -5
Jan 5, 2024 20:28:50 GMT -5
|
Post by moparman18064 on Jan 23, 2024 19:48:48 GMT -5
Thumbs up! I built this when I was a kid, it went together with no real issues. Of course I didn’t even paint it back then.
|
|
|
|
Post by kyledehart5 on Jan 23, 2024 20:15:41 GMT -5
Thumbs up! I built this when I was a kid, it went together with no real issues. Of course I didn’t even paint it back then. Thank you for dropping in!! I am enjoying it so far. |
|
|
|
Post by 406 Silverado on Jan 24, 2024 20:18:18 GMT -5
Thumbs up! I built this when I was a kid, it went together with no real issues. Of course I didn’t even paint it back then. Thank you for dropping in!! I am enjoying it so far. Mike Sharp just dropped in and posted his thread. If you've got any questions he's the guy to talk to. 62 Corvette Gasser |
|
|
|
Post by kyledehart5 on Jan 24, 2024 21:04:49 GMT -5
Thank you for dropping in!! I am enjoying it so far. Mike Sharp just dropped in and posted his thread. If you've got any questions he's the guy to talk to. 62 Corvette Gasser Brilliant!! Can’t wait to check out Mike’s thread. |
|
|
|
Post by kyledehart5 on Jan 29, 2024 23:58:08 GMT -5
Body sneak peak as the rain finally stopped and I was able to paint a little. I'm going to attempt the kit decals so went with a pinkish scallop to match the pinkish decals. We shall see how that goes.  |
|
handiabled
Community Relations Moderator
Member since: February 2023
Posts: 3,218
MSC Staff
|
Post by handiabled on Jan 30, 2024 5:35:44 GMT -5
What did you use for the blue body paint?
|
|
|
|
Post by 406 Silverado on Jan 30, 2024 5:43:30 GMT -5
Nice and smooth paint work going on with this Vette Kyle. I'm with Brent....what did you use for the color?  |
|
|
|
Post by kyledehart5 on Jan 30, 2024 10:44:02 GMT -5
What did you use for the blue body paint? Nice and smooth paint work going on with this Vette Kyle. I'm with Brent....what did you use for the color? Thanks guys. I’m at work but when I get home I’ll get a photo of the blue paint. It’s a gaianotes prism Pearl, I just don’t remember the name or color. |
|
70 STING
Full Member
Member since: April 2023
Posts: 507
Apr 10, 2023 11:44:31 GMT -5
Apr 10, 2023 11:44:31 GMT -5
|
Post by 70 STING on Jan 30, 2024 10:55:54 GMT -5
Looks like TS-19 Metallic Blue.
|
|
|
|
Post by kyledehart5 on Jan 30, 2024 13:03:39 GMT -5
I’d say it’s similar but this has a lot of green Pearl. The base you paint it over changes how much green you can see.
|
|
atomicholiday
Full Member
Member since: September 2023
Posts: 411
Sept 4, 2023 8:25:11 GMT -5
Sept 4, 2023 8:25:11 GMT -5
|
Post by atomicholiday on Jan 30, 2024 14:40:39 GMT -5
I’m digging this. Paint looks great!👍
|
|
brandonk
Full Member
Jan '24 Showcased Model Awarded
Member since: May 2023
Posts: 829
May 14, 2023 13:45:45 GMT -5
May 14, 2023 13:45:45 GMT -5
|
Post by brandonk on Jan 30, 2024 15:25:57 GMT -5
Those gassers for the 60's and 70's had some wild paint jobs. This will fit right into that.
|
|
Pro Tech | MAD | Scale Motorsport
