Hobby rooms, mancaves..2013 Where do you build

[Green KreationZ]

Sept 22, 2023 12:43:43 GMT -5 Medicman71 said:

A slightly updated pic of the bench. There's a new spray booth that I've had that wasn't in the first pic. Also new stickers on the fridge.

Pretty slick setup! 

[Green KreationZ]

Here’s my setup as of year ago. Not much has changed other then moving the Vallejo paint into my closet and adding the entire Tamiya flat line up. Also have the entire Alclad lineup next to it. I’m lookin to relocate my paint onto the wall just below the shelf. I need more shelf real estate for a few 1/350 ships I have planned.

[keavdog]

Nice setup and great mood lighting. Calm the nerves a bit when things go south. Monster gaming station too. Is that one of those liquid cooled beasts?

[Joe Rix]

That is a really sweet set up you have TS. Very cool lighting. Seems you have ample space for modeling those 1/350 ships you just acquired. Yet, it seems that you lack clutter.

[Green KreationZ]

Nov 27, 2023 23:42:38 GMT -5 Joe Rix said:

That is a really sweet set up you have TS. Very cool lighting. Seems you have ample space for modeling those 1/350 ships you just acquired. Yet, it seems that you lack clutter.

Thank you! I try to keep it as organized as I can. I have lost many parts when I get too much stuff on my work area. Just a few days ago a PE piece fell off of a part on my D3A1 I’m building. I’m pretty sure it went into the phantom realm because I couldn’t find it anywhere. 

[Green KreationZ]

Nov 27, 2023 23:15:34 GMT -5 keavdog said:

Nice setup and great mood lighting. Calm the nerves a bit when things go south. Monster gaming station too. Is that one of those liquid cooled beasts?

Thank you! It is a liquid cooled PC I built when I finished grad school in 2018. It is starting to show its age a bit, but still relatively fast. 

[chromdome35]

Nov 28, 2023 0:13:31 GMT -5 Green KreationZ said:

Nov 27, 2023 23:15:34 GMT -5 keavdog said:

Nice setup and great mood lighting. Calm the nerves a bit when things go south. Monster gaming station too. Is that one of those liquid cooled beasts?

Thank you! It is a liquid cooled PC I built when I finished grad school in 2018. It is starting to show its age a bit, but still relatively fast. 

Love your building space. The lighting is on point.

I have been building my own PC's since the early 90's when you had to go into debug to low-level format the 20MB hard drive. G=C800:5 will be forever burned into my memory.

What water cooling system are you using? I have the Corsair radiator and block for my CPU and an NVIDIA water-cooled graphics board. I'm currently running 3 32" curved monitors and a small 13" screen (IP Security camera monitor) off mine.

[Green KreationZ]

Nov 28, 2023 1:16:17 GMT -5 chromdome35 said:

Nov 28, 2023 0:13:31 GMT -5 Green KreationZ said:

Thank you! It is a liquid cooled PC I built when I finished grad school in 2018. It is starting to show its age a bit, but still relatively fast. 

Love your building space. The lighting is on point.

I have been building my own PC's since the early 90's when you had to go into debug to low-level format the 20MB hard drive. G=C800:5 will be forever burned into my memory.

What water cooling system are you using? I have the Corsair radiator and block for my CPU and an NVIDIA water-cooled graphics board. I'm currently running 3 32" curved monitors and a small 13" screen (IP Security camera monitor) off mine.

Thank you! 

I wish I had as many monitors as you! 

Mine is EKWB water cooling blocks. My CPU and GPU are both in the loop. I have two 360mm rads to assist with the cooling. I did all the pipes with hard tubing. 









Currently I have clear liquid in it instead of green, but I might switch back soon. 

[chromdome35]

Nov 28, 2023 9:02:06 GMT -5 Green KreationZ said:

Nov 28, 2023 1:16:17 GMT -5 chromdome35 said:

Love your building space. The lighting is on point.

I have been building my own PC's since the early 90's when you had to go into debug to low-level format the 20MB hard drive. G=C800:5 will be forever burned into my memory.

What water cooling system are you using? I have the Corsair radiator and block for my CPU and an NVIDIA water-cooled graphics board. I'm currently running 3 32" curved monitors and a small 13" screen (IP Security camera monitor) off mine.

Thank you! 

I wish I had as many monitors as you! 

Mine is EKWB water cooling blocks. My CPU and GPU are both in the loop. I have two 360mm rads to assist with the cooling. I did all the pipes with hard tubing. 









Currently I have clear liquid in it instead of green, but I might switch back soon. 

THAT IS BAD ASS! I love it. I've never done my own piping, major kudos to you.

[Green KreationZ]

Nov 28, 2023 9:06:39 GMT -5 chromdome35 said:

Nov 28, 2023 9:02:06 GMT -5 Green KreationZ said:

Thank you! 

I wish I had as many monitors as you! 

Mine is EKWB water cooling blocks. My CPU and GPU are both in the loop. I have two 360mm rads to assist with the cooling. I did all the pipes with hard tubing. 









Currently I have clear liquid in it instead of green, but I might switch back soon. 

THAT IS BAD ASS! I love it. I've never done my own piping, major kudos to you.

The piping itself wasn’t terrible to be honest. I had watched YouTube videos on how to do it for years before actually doing it myself. With that being said, 5 years after doing it - I still get nervous I’ll walk in one day and one of my joints will have come loose and there will be liquid everywhere. 

[floki]

Reorganized by hobby room, the honeycomb wall and holders are all 3d printed, most I designed myself on fusion360

[Tojo72]

Really like the paint rack system

[deafpanzer]

Love it! That’s what my friend did and he sold me all of his old bench set when he started to do this. I really love your colors!

[Green KreationZ]

There’s some money to be made on those paint racks and organizer systems you developed. Either selling the STL or printing for people. They look amazing!

[kyledehart5]

I caught your youtube video showing this off and I was most impressed by the design and how you are able to set up your work area with these. Great stuff.

[keavdog]

Damn Clint! That's a work of art itself! Great idea - 3d printing the stuff. You can taylor your system to your exact needs. I've yet to dip my toe in the 3d printing world but it sure looks like a hobby of it's own. And now I need 1/16 radio equipment for my M-ATV MRAP so.....

[chromdome35]

HOLY WOW!

I love what you did with your 3D printer, what a great space!!! The ability to make EXACTLY what you want for your bench is invaluable.

What kind of printer do you have and would you be willing to share how much something like that costs to print? I imagine it takes quite a bit of filament.

[jeaton01]

Impressive!

[floki]

Thank you so much everyone, I'm glad you guys like what I've did here.

[floki]

Jan 7, 2024 10:30:06 GMT -5 Green KreationZ said:

There’s some money to be made on those paint racks and organizer systems you developed. Either selling the STL or printing for people. They look amazing!

Thank you! I'm cleaning up the files and going to release them for free on printables, the main honeycomb wall is not my design, I've just designed the holders I'm using on it

[floki]

Jan 7, 2024 11:39:07 GMT -5 kyledehart5 said:

I caught your youtube video showing this off and I was most impressed by the design and how you are able to set up your work area with these. Great stuff.

Thank you! And thanks for watching my videos. I got a few in the works right now, just got to do some editing

[floki]

Jan 7, 2024 13:10:32 GMT -5 keavdog said:

Damn Clint! That's a work of art itself! Great idea - 3d printing the stuff. You can taylor your system to your exact needs. I've yet to dip my toe in the 3d printing world but it sure looks like a hobby of it's own. And now I need 1/16 radio equipment for my M-ATV MRAP so.....

Thank you! For that you would definitely want to go with resin, I got a elegoo Saturn for printing resin tracks and accessories for models.

[floki]

Jan 7, 2024 13:15:27 GMT -5 chromdome35 said:

HOLY WOW!

I love what you did with your 3D printer, what a great space!!! The ability to make EXACTLY what you want for your bench is invaluable.

What kind of printer do you have and would you be willing to share how much something like that costs to print? I imagine it takes quite a bit of filament.

Thank you! I got two printers now a Elegoo Saturn resin printer and a Bambu Labs fdm printer that I used to make all this. It took about 5 rolls of filament at around $18 roll, so around $100

[kyledehart5]

Jan 7, 2024 19:02:03 GMT -5 floki said:

Jan 7, 2024 11:39:07 GMT -5 kyledehart5 said:

I caught your youtube video showing this off and I was most impressed by the design and how you are able to set up your work area with these. Great stuff.

Thank you! And thanks for watching my videos. I got a few in the works right now, just got to do some editing

You're welcome! And I’ll look forward to seeing those

[Leon]

That is really great looking and frees up bench space i imagine!

[floki]

Jan 7, 2024 19:19:53 GMT -5 Leon said:

That is really great looking and frees up bench space i imagine!

That's probably what I like the most about it, so much more build space

[Medicman71]

Did some rearranging to the paint side of the bench. I wanted the compressor up where I can see and reach it. Because of that I had to move somethings around.

[deafpanzer]

Looking great Mike! Yep it is still your fault that I had to get those sets from HobbyZone.

[Joe Rix]

Looks to be a bit more user friendly for you. Looks good.

[adt70hk]

Looks great. I'll share mine shortly!

ATB.

Andrew